95J33RE Equivalent & Substitute Parts

Part Overview

The 95J33RE is a 5W wirewound axial resistor rated at 33 Ohms with ±5% tolerance, manufactured by Ohmite. This component is designed for through-hole applications requiring flame retardant coating and safety features. The part maintains Active product status with 899 units currently in stock. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across the allowed parameter range.

Substiute Parts

95J33RE

OhmiteIn Stock: 97495J33RE Datasheet

Current PartRFQ

25J33RE

OhmiteIn Stock: 71825J33RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95J33RE is determined by strict equivalence across the following critical parameters:

• Resistance value: 33 Ohms
• Tolerance: ±5%
• Power rating: 5W
• Composition: Wirewound
• Package configuration: Axial through-hole
• Temperature coefficient: ±30ppm/°C
• Safety and flame retardant features
• RoHS compliance status

The 25J33RE qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. Variations in packaging format (Box versus Bulk) and physical dimensions within the axial form factor do not affect functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J33RE and 25J33RE are Active products manufactured by Ohmite with full RoHS compliance. Selection between these parts is based on availability and packaging requirements rather than electrical or mechanical performance differences. The 95J33RE is supplied in Box packaging with higher current inventory (899 units). The 25J33RE is supplied in Bulk packaging with 689 units available. Both components satisfy identical circuit requirements for 33 Ohm, 5W wirewound axial resistor applications.

Frequently Asked Questions (FAQ)

Q: Can the 25J33RE replace the 95J33RE in existing designs? A: Yes. Both parts are electrically and mechanically equivalent with identical resistance, tolerance, power rating, temperature coefficient, and safety features. The difference in packaging format does not affect functional performance.

Q: What is the significance of the Series designation (90 versus 20)? A: The Series designation indicates the product line within Ohmite's resistor portfolio. Both Series 90 and Series 20 components meet the same electrical and mechanical specifications for this 33 Ohm, 5W application.

Q: Are there dimensional differences between these parts? A: Minor dimensional variations exist within the axial form factor. The 95J33RE measures 0.264" Dia x 0.969" L (6.70mm x 24.60mm), while the 25J33RE measures 0.276" Dia x 1.016" L (7.00mm x 25.80mm). Both dimensions are compatible with standard through-hole PCB layouts for axial components.

Q: Does packaging format affect component performance? A: No. Box and Bulk packaging formats are logistics and supply chain designations only. They do not influence electrical characteristics, reliability, or operational performance.

Q: Are both parts RoHS compliant? A: Yes. Both the 95J33RE and 25J33RE are RoHS Compliant with Moisture Sensitivity Level 1 (Unlimited), meeting regulatory requirements for electronic component applications.