Ohmite 95J30R Equivalent & Substitute Parts

Part Overview

The Ohmite 95J30R is a 30 Ohm, 5% tolerance, 5W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is designed for applications requiring reliable power dissipation in axial package configuration. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product series, enabling component procurement flexibility while preserving circuit performance.

Substiute Parts

95J30R

OhmiteIn Stock: 97495J30R Datasheet

Current PartRFQ

95J30RE

OhmiteIn Stock: 99695J30RE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The 95J30RE is classified as a parametric equivalent to the 95J30R based on the following criteria:

• Identical resistance value: 30 Ohms
• Identical tolerance: ±5%
• Identical power rating: 5W
• Identical composition: Wirewound
• Identical package type: Axial
• Identical physical dimensions: 0.264" Dia x 0.969" L (6.70mm x 24.60mm)
• Identical temperature coefficient: ±30ppm/°C
• Identical features: Flame Retardant Coating, Safety
• Identical number of terminations: 2
• Same product series: 90
• Same active product status

The primary distinction between these parts is packaging configuration and RoHS compliance status, which do not affect electrical or mechanical interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J30R and 95J30RE are Active status components from Ohmite's Series 90 wirewound resistor line. Selection between these parts should be based on regulatory compliance requirements:

• The 95J30R is suitable for applications where RoHS non-compliance is acceptable or where legacy component specifications are required.
• The 95J30RE is the appropriate selection for applications requiring ROHS3 compliance, including EU market applications and regulated industries.

Both parts are electrically and mechanically identical, with differences limited to packaging configuration (standard versus bulk) and RoHS certification status. Component selection does not affect circuit performance, thermal characteristics, or mechanical fit.

Frequently Asked Questions (FAQ)

Q: Are the 95J30R and 95J30RE electrically interchangeable?

A: Yes. Both parts have identical electrical specifications: 30 Ohm resistance, ±5% tolerance, 5W power rating, ±30ppm/°C temperature coefficient, and wirewound composition with flame retardant coating.

Q: What is the difference between these two part numbers?

A: The primary differences are RoHS compliance status (95J30R is non-compliant; 95J30RE is ROHS3 compliant) and packaging configuration (95J30R is standard packaging; 95J30RE is bulk packaging). Electrical and mechanical specifications are identical.

Q: Can I use 95J30RE as a direct replacement for 95J30R in my circuit?

A: Yes. The parts are mechanically and electrically equivalent. Physical dimensions, termination count, and all electrical parameters are identical. Substitution does not require circuit redesign or re-qualification.

Q: Does packaging type affect component performance?

A: No. Packaging configuration (standard versus bulk) affects only procurement and handling logistics. It does not impact electrical performance, thermal characteristics, or mechanical fit in the circuit.

Q: Which part should I specify for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS compliance, specify 95J30RE. For applications without RoHS requirements, either part is acceptable based on availability and procurement preferences.

Q: Are both parts currently available?

A: Yes. Both 95J30R (932 pcs) and 95J30RE (913 pcs) are listed as new original stock in inventory.