Ohmite 95J2K0 2kΩ 5W Axial Wirewound Resistor – Equivalent & Substitute Parts

Part Overview

The Ohmite 95J2K0 is a 2 kΩ ±5% 5W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status. Substitute parts are identified when packaging configurations differ or when RoHS compliance requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

95J2K0

OhmiteIn Stock: 90295J2K0 Datasheet

Current PartRFQ

95J2K0E

OhmiteIn Stock: 126595J2K0E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Ohmite 95J2K0 is determined by the following critical parameters:

• Resistance Value: 2 kΩ (exact match required)
• Tolerance: ±5% (exact match required)
• Power Rating: 5W (exact match required)
• Composition: Wirewound (exact match required)
• Package Type: Axial (exact match required)
• Physical Dimensions: 0.264" Dia × 0.969" L (exact match required)
• Temperature Coefficient: ±30ppm/°C (exact match required)
• Features: Flame Retardant Coating, Safety (exact match required)

The 95J2K0E is a parametric equivalent that maintains all electrical and mechanical specifications while differing only in packaging configuration (Bulk vs. standard) and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

95J2K0: Select this part number for applications where RoHS non-compliant components are acceptable and standard packaging is required.

95J2K0E: Select this part number for applications requiring ROHS3 compliance or when bulk packaging is specified. This variant maintains identical electrical and mechanical performance while meeting enhanced environmental standards.

Both part numbers are Active products from Ohmite's Series 90 and are direct functional equivalents. Selection between them is determined by regulatory compliance requirements and packaging specifications rather than electrical performance.

Frequently Asked Questions (FAQ)

Q: Can the 95J2K0E replace the 95J2K0 in my circuit?

A: Yes. The 95J2K0E is a parametric equivalent with identical electrical specifications (2 kΩ ±5% 5W), composition (Wirewound), package type (Axial), and physical dimensions (0.264" Dia × 0.969" L). The only differences are RoHS compliance status and packaging configuration.

Q: What is the difference between these part numbers?

A: The 95J2K0E differs from the 95J2K0 in two aspects: it is ROHS3 compliant (versus RoHS non-compliant) and supplied in Bulk packaging (versus standard packaging). All electrical and mechanical parameters are identical.

Q: Are there any circuit performance differences between these parts?

A: No. Both parts share identical resistance value, tolerance, power rating, temperature coefficient, and physical dimensions. Circuit performance is equivalent.

Q: Which part should I specify for new designs?

A: Specify based on your regulatory and procurement requirements. If ROHS3 compliance is mandated, use 95J2K0E. If standard packaging is required and RoHS non-compliance is acceptable, use 95J2K0.

Q: Are both parts currently available?

A: Both parts are Active products. Inventory availability should be confirmed with your supplier, as stock levels vary.