Ohmite 95J22RE Equivalent & Substitute Parts

Part Overview

The Ohmite 95J22RE is a 22 Ohms ±5% 5W through-hole wirewound resistor with axial leads, flame retardant coating, and safety features. This component is classified as Active product status and is RoHS Compliant. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory compliance align with the original component's functional requirements.

Substiute Parts

95J22RE

OhmiteIn Stock: 78695J22RE Datasheet

Current PartRFQ

25J22RE

OhmiteIn Stock: 75325J22RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Ohmite 25J22RE qualifies as a direct substitute for the 95J22RE based on the following critical parameters:

• Electrical Equivalence: Identical resistance value (22 Ohms), tolerance (±5%), and power rating (5W)
• Composition Match: Both are wirewound resistors with flame retardant coating and safety features
• Mechanical Compatibility: Both use axial package configuration with 2 terminations
• Thermal Performance: Identical temperature coefficient (±30ppm/°C)
• Regulatory Compliance: Both meet RoHS requirements (95J22RE: RoHS Compliant; 25J22RE: ROHS3 Compliant)

Physical dimensions differ slightly (95J22RE: 0.264" Dia × 0.969" L vs. 25J22RE: 0.276" Dia × 1.016" L), but both remain within standard axial resistor form factors suitable for through-hole PCB applications.

Parameter Comparison

Engineering Selection Recommendations

The Ohmite 25J22RE is electrically and mechanically equivalent to the 95J22RE for applications requiring a 22 Ohms ±5% 5W wirewound axial resistor. Both components maintain Active product status and satisfy RoHS compliance requirements. The 25J22RE carries ROHS3 certification, indicating compliance with the most current RoHS directive revision. Selection between these parts should be based on packaging requirements (Box vs. Bulk) and inventory availability rather than functional performance, as electrical and thermal characteristics are identical.

Frequently Asked Questions (FAQ)

Q: Can the 25J22RE replace the 95J22RE in existing designs? A: Yes. Both resistors share identical electrical specifications (22 Ohms ±5%, 5W), composition (wirewound), and thermal performance (±30ppm/°C). The axial package configuration is compatible with standard through-hole PCB layouts.

Q: What is the difference between the packaging options? A: The 95J22RE is supplied in Box packaging, while the 25J22RE is supplied in Bulk packaging. This distinction affects order quantities and handling but does not impact component performance or compatibility.

Q: Are there dimensional concerns when substituting? A: The 25J22RE is slightly larger (0.276" Dia × 1.016" L) compared to the 95J22RE (0.264" Dia × 0.969" L). Both remain within standard axial resistor form factors. PCB layout should accommodate the maximum dimensions of the substitute part.

Q: Do both parts meet current RoHS requirements? A: Yes. The 95J22RE is RoHS Compliant, and the 25J22RE is ROHS3 Compliant. Both satisfy regulatory requirements for lead-free and restricted substance compliance.

Q: What series designation differences exist? A: The 95J22RE belongs to the 90 series, while the 25J22RE belongs to the 20 series. Series designation reflects Ohmite's internal product categorization and does not affect electrical or mechanical compatibility.