Ohmite 95J1R2 1.2 Ohm 5W Axial Wirewound Resistor Equivalent & Substitute Parts

Part Overview

The Ohmite 95J1R2 is a 1.2 Ohm, 5% tolerance, 5W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status with 1079 units currently in stock. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across the same product series, enabling procurement flexibility and supply chain continuity.

Substiute Parts

95J1R2

OhmiteIn Stock: 115295J1R2 Datasheet

Current PartRFQ

95J1R2E

OhmiteIn Stock: 99995J1R2E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 95J1R2 are identified based on strict electrical and mechanical parameter matching within the Ohmite 90 series. The substitution criteria are:

• Identical resistance value: 1.2 Ohms
• Identical tolerance: ±5%
• Identical power rating: 5W
• Identical composition: Wirewound
• Identical package type: Axial
• Identical physical dimensions: 0.264" Dia x 0.969" L (6.70mm x 24.60mm)
• Identical temperature coefficient: ±100ppm/°C
• Identical features: Flame Retardant Coating, Safety

The 95J1R2E is classified as a parametric equivalent within the same product series, differing only in packaging configuration (Bulk vs. standard packaging) and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J1R2 and 95J1R2E maintain identical electrical and mechanical specifications within the Ohmite 90 series. Selection between these parts should be based on:

• RoHS compliance requirements: The 95J1R2E is ROHS3 compliant, while the 95J1R2 is RoHS non-compliant. Applications subject to RoHS regulations must use the 95J1R2E.
• Packaging requirements: The 95J1R2E is supplied in Bulk packaging, while the 95J1R2 uses standard packaging. Procurement volume and handling procedures should determine packaging selection.
• Inventory availability: Both parts are in active production with adequate stock levels (1079 and 946 units respectively).

Frequently Asked Questions (FAQ)

Q: Can the 95J1R2E be used as a direct replacement for the 95J1R2?

A: Yes. Both parts are electrically and mechanically identical, with matching resistance (1.2 Ohms), tolerance (±5%), power rating (5W), composition (Wirewound), package type (Axial), and physical dimensions (0.264" Dia x 0.969" L). The primary differences are packaging configuration and RoHS compliance status.

Q: What is the difference between the 95J1R2 and 95J1R2E?

A: The 95J1R2E differs in two aspects: it is supplied in Bulk packaging and is ROHS3 compliant, whereas the 95J1R2 uses standard packaging and is RoHS non-compliant. All electrical and mechanical parameters are identical.

Q: Which part should I select for RoHS-regulated applications?

A: The 95J1R2E is ROHS3 compliant and must be used for applications subject to RoHS directives. The 95J1R2 is not RoHS compliant and is unsuitable for such applications.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both the 95J1R2 and 95J1R2E have identical dimensions of 0.264" Dia x 0.969" L (6.70mm x 24.60mm), ensuring mechanical compatibility in PCB layouts and enclosures.

Q: What is the temperature coefficient specification for these resistors?

A: Both parts have a temperature coefficient of ±100ppm/°C, indicating stable resistance performance across the operating temperature range.