Ohmite 95J1K8 Equivalent & Substitute Parts

Part Overview

The Ohmite 95J1K8 is a 1.8 kOhms ±5% 5W through-hole resistor with axial leads, featuring flame retardant coating and safety wirewound construction. This component is classified as Active product status with 924 units currently in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set for wirewound axial resistors.

Substiute Parts

95J1K8

OhmiteIn Stock: 96595J1K8 Datasheet

Current PartRFQ

25J1K8

OhmiteIn Stock: 115825J1K8 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95J1K8 is determined by matching the following critical parameters:

• Resistance value: 1.8 kOhms
• Tolerance: ±5%
• Power rating: 5W
• Composition: Wirewound
• Package: Axial with 2 terminations
• Temperature coefficient: ±30ppm/°C
• Features: Flame retardant coating and safety construction

The substitute part 25J1K8 meets all these criteria, differing only in series designation (20 vs. 90) and minor dimensional variations within the axial package envelope. Both parts are manufactured by Ohmite and maintain identical electrical performance specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J1K8 and 25J1K8 are Active products from Ohmite with identical electrical specifications. Selection between these parts should be based on:

• PCB layout constraints: The 25J1K8 has slightly larger dimensions (0.276" diameter vs. 0.264", and 1.016" length vs. 0.969"). Verify board space availability before substitution.
• Packaging requirements: The 95J1K8 is supplied in standard packaging, while the 25J1K8 is supplied in bulk packaging. Confirm procurement and inventory management compatibility.
• Compliance requirements: Both parts carry identical RoHS non-compliant status and share the same ECCN (EAR99) and HTSUS (8533.21.0080) classifications.

Frequently Asked Questions (FAQ)

Q: Can the 25J1K8 directly replace the 95J1K8 in existing designs?

A: Yes, provided PCB layout accommodates the slightly larger axial dimensions of the 25J1K8 (0.276" diameter and 1.016" length). All electrical parameters are identical.

Q: What is the difference between the 95J1K8 and 25J1K8?

A: The parts differ in series designation (90 vs. 20), packaging format (standard vs. bulk), and minor dimensional variations. Electrical specifications, tolerance, power rating, and temperature coefficient are identical.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), ECCN classification (EAR99), and HTSUS code (8533.21.0080).

Q: What should I verify before substituting the 25J1K8 for the 95J1K8?

A: Confirm that PCB layout accommodates the 25J1K8 dimensions and that bulk packaging meets your procurement workflow requirements.

Q: Do both parts have the same temperature coefficient?

A: Yes. Both the 95J1K8 and 25J1K8 have a temperature coefficient of ±30ppm/°C.