Ohmite 95J1K6 1.6 kOhm 5W Axial Wirewound Resistor Equivalent & Substitute Parts

Part Overview

The Ohmite 95J1K6 is a 1.6 kOhm, 5W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status with 852 pieces currently in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, supply chain considerations, or specific compliance requirements.

Substiute Parts

95J1K6

OhmiteIn Stock: 91795J1K6 Datasheet

Current PartRFQ

95J1K6E

OhmiteIn Stock: 123295J1K6E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Ohmite 95J1K6 is determined by strict equivalence across the following parameters:

• Resistance value: 1.6 kOhms
• Tolerance: ±5%
• Power rating: 5W
• Composition: Wirewound
• Package configuration: Axial
• Physical dimensions: 0.264" Dia x 0.969" L (6.70mm x 24.60mm)
• Temperature coefficient: ±30ppm/°C
• Termination count: 2

The substitute part 95J1K6E meets all electrical and mechanical criteria for direct substitution. Differences in RoHS compliance status and moisture sensitivity level do not affect functional equivalence but may impact application suitability based on regulatory or environmental requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J1K6 and 95J1K6E are Active status components from Ohmite's Series 90 product line. The 95J1K6E offers ROHS3 compliance, which may be required for applications subject to RoHS directives. The 95J1K6 is classified as RoHS non-compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. Both parts are electrically and mechanically identical across all functional parameters.

Frequently Asked Questions (FAQ)

Q: Can the 95J1K6E be used as a direct replacement for the 95J1K6?

A: Yes. The 95J1K6E is electrically and mechanically equivalent to the 95J1K6 across all specified parameters including resistance value, tolerance, power rating, composition, package type, and physical dimensions.

Q: What is the difference between the 95J1K6 and 95J1K6E?

A: The primary differences are RoHS compliance status and moisture sensitivity level classification. The 95J1K6E is ROHS3 compliant with MSL 1 (Unlimited), while the 95J1K6 is RoHS non-compliant with MSL not applicable. Electrical and mechanical specifications are identical.

Q: Are the physical dimensions identical between both parts?

A: Yes. Both parts have identical dimensions of 0.264" Dia x 0.969" L (6.70mm x 24.60mm) and use the same axial package configuration.

Q: Which part should be selected for RoHS-regulated applications?

A: The 95J1K6E should be selected for applications requiring RoHS compliance, as it carries ROHS3 certification.

Q: Do both parts have the same temperature coefficient?

A: Yes. Both the 95J1K6 and 95J1K6E have a temperature coefficient of ±30ppm/°C.