Ohmite 95J130 5W 130 Ohm Axial Wirewound Resistor - Equivalent & Substitute Parts

Part Overview

The Ohmite 95J130 is a 5W axial wirewound resistor with 130 ohms resistance and ±5% tolerance. This through-hole component features flame retardant coating and safety construction, designed for applications requiring reliable power dissipation in compact form factors. The part is currently active in production with 1005 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across the same product series, enabling procurement flexibility and supply chain continuity.

Substiute Parts

95J130

OhmiteIn Stock: 103995J130 Datasheet

Current PartRFQ

95J130E

OhmiteIn Stock: 70995J130E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 95J130 are identified based on strict equivalence of the following critical parameters:

• Resistance value: 130 Ohms
• Tolerance: ±5%
• Power rating: 5W
• Composition: Wirewound
• Package configuration: Axial
• Physical dimensions: 0.264" Dia x 0.969" L (6.70mm x 24.60mm)
• Temperature coefficient: ±30ppm/°C
• Termination count: 2
• Series family: 90

The substitute part 95J130E maintains identical electrical and mechanical specifications, ensuring direct functional compatibility in circuit applications. Both parts are manufactured by Ohmite within the same product series.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J130 and 95J130E are active production parts manufactured by Ohmite with identical electrical and mechanical specifications. Selection between these parts should be based on regulatory compliance requirements:

The 95J130E offers ROHS3 compliance with defined moisture sensitivity level (MSL 1), making it suitable for applications subject to RoHS directives and environmental regulations. The 95J130 is RoHS non-compliant and should be selected only when regulatory exemptions apply or legacy system compatibility is required.

For new designs and applications without specific legacy constraints, the 95J130E is the preferred selection due to its enhanced compliance posture. Both parts are available in production quantities with adequate inventory levels.

Frequently Asked Questions (FAQ)

Q: Can the 95J130E directly replace the 95J130 in existing circuits?

A: Yes. Both parts maintain identical resistance (130 Ohms), tolerance (±5%), power rating (5W), physical dimensions (0.264" Dia x 0.969" L), and all other electrical specifications. Direct substitution is functionally equivalent.

Q: What is the primary difference between these two parts?

A: The 95J130E is ROHS3 compliant with defined moisture sensitivity level (MSL 1), while the 95J130 is RoHS non-compliant. Electrical and mechanical performance are identical.

Q: Are there any package or form factor differences?

A: No. Both parts use identical axial package configuration with the same physical dimensions (6.70mm x 24.60mm). PCB layout and mounting procedures are unchanged.

Q: Which part should be specified for new designs?

A: The 95J130E is recommended for new designs due to ROHS3 compliance and defined moisture sensitivity characteristics, unless specific legacy or exemption requirements mandate the 95J130.

Q: Are both parts currently in production?

A: Yes. Both the 95J130 and 95J130E are active production parts with current inventory availability (1005 and 694 units respectively).