Ohmite 95J11K Equivalent & Substitute Parts

Part Overview

The Ohmite 95J11K is an 11 kOhms ±5% 5W through-hole resistor with axial leads, featuring flame retardant coating and safety wirewound construction. This component is classified as Active product status and remains in production. Substitute parts are identified when the primary part becomes unavailable, when inventory constraints require alternative sourcing, or when equivalent electrical and mechanical specifications can be met by alternative manufacturers or series within the same product category.

Substiute Parts

95J11K

OhmiteIn Stock: 107595J11K Datasheet

Current PartRFQ

25J11K

OhmiteIn Stock: 80525J11K Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Ohmite 95J11K is determined by strict equivalence across the following critical parameters:

• Resistance value: 11 kOhms
• Tolerance: ±5%
• Power rating: 5W
• Composition: Wirewound
• Package configuration: Axial
• Temperature coefficient: ±30ppm/°C
• Features: Flame retardant coating and safety construction
• Number of terminations: 2

The Ohmite 25J11K qualifies as a direct substitute because it maintains identical electrical specifications and functional characteristics across all critical parameters. Differences in series designation (90 vs. 20) and physical dimensions (diameter and length) do not affect electrical performance or circuit compatibility when the core specifications remain equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the Ohmite 95J11K and 25J11K are Active products manufactured by Ohmite with identical electrical specifications. Selection between these parts should be based on:

• Inventory availability and lead time requirements
• Physical space constraints within the circuit board layout, as the 25J11K exhibits slightly larger dimensions (0.276" diameter vs. 0.264" diameter; 1.016" length vs. 0.969" length)
• Packaging format preference (95J11K supplied in standard packaging; 25J11K supplied in bulk packaging)
• Compliance requirements: both parts maintain RoHS non-compliant status, consistent with wirewound resistor technology in this power class

Frequently Asked Questions (FAQ)

Q: Can the Ohmite 25J11K be used as a direct replacement for the 95J11K in all applications?

A: Yes, the 25J11K is electrically equivalent to the 95J11K. Both parts share identical resistance, tolerance, power rating, temperature coefficient, and construction features. Physical dimension differences are minor and do not affect electrical performance. Verify that circuit board layout accommodates the slightly larger dimensions of the 25J11K before substitution.

Q: What are the key differences between the 95J11K and 25J11K?

A: The primary differences are series designation (90 vs. 20), physical dimensions, and packaging format. The 95J11K measures 0.264" diameter by 0.969" length, while the 25J11K measures 0.276" diameter by 1.016" length. All electrical parameters remain identical.

Q: Are there any compliance or certification differences between these parts?

A: Both parts maintain identical RoHS non-compliant status and share the same ECCN and HTSUS classifications. No compliance differences exist between the two parts.

Q: Which part should I select if space is limited on the circuit board?

A: The 95J11K has slightly smaller dimensions and may be preferable in space-constrained applications. However, the dimensional difference is minimal (0.012" diameter and 0.047" length), and the 25J11K will fit in most standard through-hole layouts designed for 5W axial resistors.

Q: Can I mix 95J11K and 25J11K parts in the same production run?

A: Yes, both parts are functionally equivalent and can be used interchangeably in the same circuit design. Ensure that your assembly process and quality documentation account for both part numbers if mixed sourcing is implemented.