Equivalent & Substitute Parts for 95C06F6GWRT

Part Overview

The 95C06F6GWRT is a tactile switch manufactured by Grayhill Inc., classified as SPST-NO (Single Pole Single Throw - Normally Open) with a contact rating of 0.05A at 12VDC. This surface mount component features top actuation with a plunger-type actuator and gull wing termination. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and functional equivalence to support design flexibility, inventory optimization, and supply chain continuity.

Substiute Parts

95C06F6GWRT

Grayhill Inc.In Stock: 90995C06F6GWRT Datasheet

Current PartRFQ

TL3303AF100QG

E-SwitchIn Stock: 21473TL3303AF100QG Datasheet

SimilarRFQ

TL6700AF160QG

E-SwitchIn Stock: 31165TL6700AF160QG Datasheet

SimilarRFQ

TL6700AF260QG

E-SwitchIn Stock: 19551TL6700AF260QG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95C06F6GWRT is determined by the following mandatory parameters:

Electrical Equivalence Requirements:

• Circuit configuration must be SPST-NO
• Contact rating must be 0.05A @ 12VDC
• Switch function must be Off-Mom (momentary operation)

Mechanical Compatibility Requirements:

• Mounting type must be Surface Mount
• Actuator orientation must be Top Actuated
• Termination style must be Gull Wing
• Non-illuminated configuration

Environmental & Compliance Requirements:

• Operating temperature range must encompass or match the application range
• RoHS compliance status must be active (RoHS Compliant or ROHS3 Compliant)
• MSL rating must be 1 (Unlimited)

All three substitute parts (TL3303AF100QG, TL6700AF160QG, TL6700AF260QG) meet these mandatory criteria. Variations in actuator height, operating force, mechanical life, and actuator material are secondary parameters that do not disqualify substitution but must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are qualified for electrical and functional equivalence to the 95C06F6GWRT. Selection among these alternatives is based on the following engineering criteria:

TL3303AF100QG (E-Switch): This substitute offers the lowest operating force (100gf) and shortest actuator height (4.30mm). It is suitable for applications requiring minimal actuation effort and compact vertical profile. The mechanical life rating of 100,000 cycles is lower than the primary part; this must be evaluated against application duty cycle requirements. RoHS3 compliance and unlimited MSL rating ensure regulatory alignment.

TL6700AF160QG (E-Switch): This substitute provides moderate operating force (160gf) with the lowest actuator height (3.40mm) among the TL6700 series options. The mechanical life rating of 500,000 cycles exceeds the primary part specification. Process sealed construction provides enhanced environmental protection. Switch travel of 0.35mm differs from the primary part; this parameter must be validated for tactile feedback consistency in the target application.

TL6700AF260QG (E-Switch): This substitute offers operating force (260gf) closest to the primary part (520gf), though still significantly lower. Actuator height is 3.40mm. The mechanical life rating of 100,000 cycles is lower than the primary part. Process sealed construction and silicone rubber actuator material provide environmental robustness. Switch travel of 0.35mm must be validated for application compatibility.

All substitutes maintain the required electrical specifications (0.05A @ 12VDC, SPST-NO), surface mount configuration, gull wing termination, and non-illuminated design. Operating temperature ranges of -20°C ~ 70°C are compatible with the primary part's -25°C ~ 70°C specification for most applications. RoHS3 compliance of all substitutes meets or exceeds the primary part's RoHS compliance status.

Frequently Asked Questions (FAQ)

Q: Can TL3303AF100QG be used as a direct replacement for 95C06F6GWRT?

A: TL3303AF100QG meets all mandatory electrical and mechanical compatibility criteria: SPST-NO circuit, 0.05A @ 12VDC contact rating, surface mount configuration, top actuation, and gull wing termination. However, the actuator height (4.30mm vs. 7.30mm) and operating force (100gf vs. 520gf) differ significantly. PCB layout and user interface feel must be evaluated. Mechanical life is 100,000 cycles versus 300,000 cycles for the primary part.

Q: What are the key differences between TL6700AF160QG and TL6700AF260QG?

A: Both parts share identical outline dimensions (6.90mm x 6.20mm), actuator height (3.40mm), switch travel (0.35mm), and process sealed construction. The primary difference is operating force: TL6700AF160QG requires 160gf actuation force with 500,000 cycle mechanical life, while TL6700AF260QG requires 260gf with 100,000 cycle mechanical life. Selection depends on required actuation effort and expected cycle count in the application.

Q: Are all substitutes available in the same packaging as the primary part?

A: The primary part 95C06F6GWRT packaging is listed as "-" (not specified). All three substitutes are available in Tape & Reel (TR) packaging. Confirm packaging requirements with your procurement specification before finalizing part selection.

Q: Does the operating temperature range difference affect substitution eligibility?

A: The primary part operates from -25°C to 70°C, while all substitutes operate from -20°C to 70°C. The substitutes have a 5°C higher minimum operating temperature. For applications requiring operation below -20°C, the primary part 95C06F6GWRT is required. For applications within -20°C to 70°C, substitutes are compatible.

Q: What is the significance of "Process Sealed" construction on TL6700 series parts?

A: Process sealed construction on TL6700AF160QG and TL6700AF260QG indicates enhanced environmental protection against moisture and contaminants during manufacturing and assembly. This feature does not affect electrical equivalence but provides additional robustness for applications in humid or contaminated environments. The primary part does not specify this feature.

Q: Can I substitute based on operating force alone?

A: No. Operating force is a secondary parameter. Substitution must first satisfy mandatory criteria: SPST-NO circuit, 0.05A @ 12VDC rating, surface mount configuration, top actuation, gull wing termination, and non-illuminated design. Operating force variation (100gf to 520gf across options) affects user experience and must be validated for specific application requirements, but does not disqualify electrical equivalence.

Q: Are all substitutes RoHS compliant?

A: Yes. The primary part is RoHS Compliant. All three substitutes are ROHS3 Compliant, which represents an updated RoHS standard. ROHS3 compliance meets or exceeds RoHS compliance requirements and is suitable for applications requiring RoHS certification.