Equivalent & Substitute Parts for 95C06F4GWRT

Part Overview

The Grayhill Inc. 95C06F4GWRT is an active-status tactile switch featuring SPST-NO (Single Pole Single Throw - Normally Open) circuit configuration with 0.05A contact rating at 12VDC. This surface mount component provides tactile feedback through a plunger actuator with 260gf operating force and 500,000 cycle mechanical life. The switch operates across -25°C to 70°C temperature range with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and functional performance within the tactile switch product category.

Substiute Parts

95C06F4GWRT

Grayhill Inc.In Stock: 115295C06F4GWRT Datasheet

Current PartRFQ

TL3303AF100QG

E-SwitchIn Stock: 21473TL3303AF100QG Datasheet

SimilarRFQ

TL6700AF160QG

E-SwitchIn Stock: 31165TL6700AF160QG Datasheet

SimilarRFQ

TL6700AF260QG

E-SwitchIn Stock: 19551TL6700AF260QG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 95C06F4GWRT are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Electrical Compatibility Requirements:

• Circuit configuration: SPST-NO
• Contact rating: 0.05A @ 12VDC
• Switch function: Off-Mom (momentary operation)

Mechanical Compatibility Requirements:

• Mounting type: Surface Mount
• Termination style: Gull Wing
• Actuator orientation: Top Actuated
• Packaging: Tape & Reel (TR)

Environmental & Compliance Requirements:

• RoHS3 compliance
• MSL 1 rating
• REACH Unaffected status
• ECCN EAR99 classification

The three substitute parts (TL6700AF260QG, TL3303AF100QG, TL6700AF160QG) satisfy all electrical and mechanical compatibility criteria. Variations in actuator height, outline dimensions, operating force, switch travel, mechanical life, and actuator material represent design alternatives within the same functional category and do not preclude substitution when application requirements permit.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain active product status and full compliance with RoHS3, REACH, and MSL 1 requirements. Selection among substitute options depends on application-specific mechanical constraints:

TL6700AF260QG (E-Switch): Matches the 95C06F4GWRT operating force specification (260gf) and mechanical life (500,000 cycles). Reduced actuator height (3.40mm versus 7.30mm) and increased switch travel (0.35mm versus 0.25mm) require PCB layout verification. Process-sealed design provides environmental protection.

TL6700AF160QG (E-Switch): Provides 500,000 cycle mechanical life matching the primary part. Operating force of 160gf represents a lower actuation requirement. Reduced actuator height and process-sealed construction offer design flexibility for space-constrained applications.

TL3303AF100QG (E-Switch): Maintains 0.25mm switch travel matching the 95C06F4GWRT. Operating force of 100gf and 100,000 cycle mechanical life represent reduced performance specifications. Intermediate actuator height (4.30mm) and compact outline (6.20mm x 6.00mm) suit applications with minimal vertical clearance.

All substitute parts operate within -20°C to 70°C range, which encompasses the primary part's lower temperature limit of -25°C for applications not requiring extended cold-temperature operation.

Frequently Asked Questions (FAQ)

Q: Can TL6700AF260QG directly replace 95C06F4GWRT in existing PCB designs?

A: Electrical and functional compatibility is confirmed. Physical substitution requires verification of actuator height clearance (3.40mm versus 7.30mm) and switch travel accommodation (0.35mm versus 0.25mm) within the mechanical envelope. Outline dimensions differ (6.90mm x 6.20mm versus 6.20mm x 6.20mm), requiring footprint assessment.

Q: What is the primary difference between TL6700AF260QG and TL6700AF160QG?

A: Both parts share identical mechanical specifications (3.40mm actuator height, 6.90mm x 6.20mm outline, 0.35mm switch travel, process-sealed design). The distinction is operating force: TL6700AF260QG requires 260gf actuation force with 100,000 cycle life, while TL6700AF160QG requires 160gf with 500,000 cycle life.

Q: Is TL3303AF100QG suitable for applications requiring 500,000 cycle mechanical life?

A: No. TL3303AF100QG is rated for 100,000 mechanical cycles, which does not meet the 500,000 cycle requirement of the 95C06F4GWRT. This part is suitable only for applications with lower cycle count specifications.

Q: Do all substitute parts maintain RoHS3 and REACH compliance?

A: Yes. All three substitute parts (TL6700AF260QG, TL6700AF160QG, TL3303AF100QG) are ROHS3 compliant and REACH Unaffected, matching the primary part's regulatory status.

Q: What is the temperature operating range difference between the primary part and substitutes?

A: The 95C06F4GWRT operates from -25°C to 70°C. All substitute parts operate from -20°C to 70°C. Applications requiring operation below -20°C cannot use the substitute parts.

Q: Are all parts available in Tape & Reel packaging?

A: Yes. The primary part (95C06F4GWRT) and all three substitute parts are supplied in Tape & Reel (TR) packaging with gull wing termination style, maintaining packaging compatibility for automated assembly processes.

Q: How do actuator material differences affect substitution?

A: The 95C06F4GWRT uses polyamide (PA) nylon actuator material. TL6700 series parts use silicone rubber with process-sealed design, while TL3303AF100QG uses polyphenylene sulfide (PPS). Material differences do not affect electrical compatibility but may influence tactile feedback characteristics and environmental resistance.