Equivalent & Substitute Parts for 95C06F3T Tactile Switch

Part Overview

The 95C06F3T is an active SPST-NO tactile switch manufactured by Grayhill Inc., designed for low-voltage applications requiring momentary contact operation. This through-hole mounted component operates at 0.05A @ 12VDC with top actuation and polyamide construction. The part is ROHS3 compliant and carries unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to address application requirements including extended temperature ranges, alternative actuator heights, or packaging preferences while maintaining core electrical and mechanical compatibility.

Substiute Parts

95C06F3T

Grayhill Inc.In Stock: 120495C06F3T Datasheet

Current PartRFQ

TL6100CF130QP

E-SwitchIn Stock: 818TL6100CF130QP Datasheet

SimilarRFQ

TL6100DF130QP

E-SwitchIn Stock: 1797TL6100DF130QP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95C06F3T is determined by strict adherence to the following critical parameters:

Critical Parameters (Must Match):

• Circuit configuration: SPST-NO
• Contact rating: 0.05A @ 12VDC
• Switch function: Off-Mom (momentary operation)
• Mounting type: Through Hole
• Termination style: PC Pin
• Actuator orientation: Top Actuated
• Actuator material: Polyamide (PA), Nylon

Application-Dependent Parameters (Allowable Variation):

• Actuator height off PCB: 7.30mm (main part) vs. 6.90mm or 10.00mm (substitutes)
• Operating temperature range: -25°C ~ 70°C (main part) vs. -40°C ~ 85°C (substitutes)
• Switch travel: 0.25mm (main part) vs. 0.50mm (substitutes)
• Operating force: 160gf (main part) vs. 130gf (substitutes)
• Outline dimensions: 6.20mm x 6.20mm (main part) vs. 7.20mm x 7.20mm (substitutes)

The identified substitutes (TL6100CF130QP and TL6100DF130QP) satisfy all critical parameters. Variations in actuator height, operating force, and temperature range are application-specific considerations that do not preclude substitution when the application requirements align with the substitute specifications.

Parameter Comparison

Engineering Selection Recommendations

Both TL6100CF130QP and TL6100DF130QP are active products with ROHS3 compliance and REACH unaffected status, matching the regulatory posture of the 95C06F3T. Selection between the main part and substitutes depends on application-specific requirements:

Select 95C06F3T when:

• Actuator height of 7.30mm is required for PCB clearance or enclosure fit
• Operating force of 160gf is specified for tactile feedback requirements
• Operating temperature range of -25°C ~ 70°C is sufficient
• Switch travel of 0.25mm is required for application sensitivity
• Bag packaging is acceptable for assembly processes

Select TL6100CF130QP when:

• Lower actuator height of 6.90mm is required for compact designs
• Extended temperature range of -40°C ~ 85°C is required
• Operating force of 130gf is acceptable
• Switch travel of 0.50mm is acceptable
• Tube packaging is preferred for automated handling
• Process sealed construction is required

Select TL6100DF130QP when:

• Higher actuator height of 10.00mm is required for accessibility or ergonomic considerations
• Extended temperature range of -40°C ~ 85°C is required
• Operating force of 130gf is acceptable
• Switch travel of 0.50mm is acceptable
• Tube packaging is preferred for automated handling
• Process sealed construction is required

All three parts maintain identical electrical specifications (0.05A @ 12VDC, SPST-NO, Off-Mom function) and mechanical life rating (1,000,000 cycles), ensuring functional equivalence within their respective application envelopes.

Frequently Asked Questions (FAQ)

Q: Can TL6100CF130QP or TL6100DF130QP be used as direct replacements for 95C06F3T without PCB redesign?

A: Direct replacement depends on actuator height tolerance. The 95C06F3T has 7.30mm actuator height. TL6100CF130QP (6.90mm) may fit in applications with height clearance, while TL6100DF130QP (10.00mm) requires additional vertical space. Verify PCB layout and enclosure dimensions before substitution.

Q: What is the difference between TL6100CF130QP and TL6100DF130QP?

A: Both parts are identical except for actuator height. TL6100CF130QP has 6.90mm height; TL6100DF130QP has 10.00mm height. All other electrical and mechanical specifications are identical. Selection is based on physical space requirements.

Q: Are the operating force differences (160gf vs. 130gf) significant for substitution?

A: Operating force affects tactile feedback and actuation effort. The 95C06F3T requires 160gf; substitutes require 130gf. Applications sensitive to actuation force must verify compatibility. Lower force may result in unintended actuation in high-vibration environments.

Q: Why do the substitute parts have extended temperature ranges (-40°C ~ 85°C vs. -25°C ~ 70°C)?

A: E-Switch TL6100 series components are rated for broader temperature extremes. The 95C06F3T is rated for -25°C ~ 70°C. Substitutes are suitable for applications requiring extended temperature operation but are also compatible with the narrower range of the original part.

Q: Does switch travel difference (0.25mm vs. 0.50mm) affect functionality?

A: Switch travel is the distance the actuator moves before electrical contact occurs. The 95C06F3T has 0.25mm travel; substitutes have 0.50mm travel. Applications with specific tactile response requirements must verify compatibility. Longer travel may affect perceived responsiveness.

Q: Are packaging differences (Bag vs. Tube) important for substitution?

A: Packaging affects handling and assembly processes. The 95C06F3T is supplied in bags; substitutes are supplied in tubes. Tube packaging is preferred for automated pick-and-place assembly. Manual assembly processes may accept either format. Verify compatibility with assembly equipment.

Q: Do all three parts meet the same regulatory requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. Regulatory compliance is equivalent across all options.

Q: What does "Process Sealed" mean for the E-Switch substitutes?

A: Process sealed indicates the switch is sealed during manufacturing to prevent contamination ingress. This feature enhances reliability in harsh environments but does not change electrical or mechanical specifications relevant to substitution decisions.

Q: Can I mix 95C06F3T and TL6100 series parts in the same assembly?

A: Yes, provided each part is used in locations where its specific parameters (actuator height, operating force, temperature range) are compatible with local application requirements. Mixed usage is acceptable when application requirements are met individually at each location.