Equivalent & Substitute Parts for Grayhill 95C06F2T Tactile Switch

Part Overview

The Grayhill 95C06F2T is an SPST-NO tactile switch rated for 0.05A at 12VDC, featuring top actuation through-hole mounting with a 7.30mm actuator height. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical ratings, circuit configurations, and mechanical mounting characteristics align with application requirements, enabling component sourcing flexibility across multiple manufacturers while maintaining functional compatibility.

Substiute Parts

95C06F2T

Grayhill Inc.In Stock: 108095C06F2T Datasheet

Current PartRFQ

TL6100CF130QP

E-SwitchIn Stock: 818TL6100CF130QP Datasheet

SimilarRFQ

TL6100DF130QP

E-SwitchIn Stock: 1797TL6100DF130QP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 95C06F2T are qualified based on the following critical parameters:

Electrical Equivalence: All substitute parts maintain identical circuit configuration (SPST-NO) and contact rating (0.05A @ 12VDC), ensuring functional compatibility in the same electrical circuit.

Mechanical Compatibility: Substitute parts share the same mounting type (Through Hole), actuator orientation (Top Actuated), and termination style (PC Pin), allowing direct PCB mounting without redesign.

Functional Characteristics: All parts operate as momentary switches (Off-Mom) with polyamide actuators and provide tactile feedback through mechanical switching action.

Regulatory Compliance: All substitute parts maintain RoHS3 compliance and REACH unaffected status, meeting the same environmental and regulatory requirements as the primary part.

The identified substitutes are E-Switch TL6100CF130QP and TL6100DF130QP, which satisfy these core equivalence criteria while offering variations in actuator height and operating force specifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (95C06F2T): Use when the 7.30mm actuator height and 100gf operating force are specified design requirements. This part maintains Active product status with established supply chain availability.

Substitute Selection (TL6100CF130QP): Use when a lower actuator height (6.90mm) is acceptable and the application can accommodate 130gf operating force. This E-Switch part offers extended operating temperature range (-40°C to 85°C) and process-sealed construction. Verify PCB layout compatibility due to increased outline dimensions (7.20mm x 7.20mm versus 6.20mm x 6.20mm).

Substitute Selection (TL6100DF130QP): Use when a taller actuator height (10.00mm) is required for accessibility or ergonomic considerations. This part provides the same electrical and regulatory compliance as TL6100CF130QP with increased vertical clearance. Confirm mechanical envelope constraints before selection.

All three parts maintain identical electrical ratings, circuit configuration, and regulatory compliance status. Selection should be based on mechanical fit requirements, actuator height specifications, and operating force characteristics specific to the application.

Frequently Asked Questions (FAQ)

Q: Can TL6100CF130QP and TL6100DF130QP be used interchangeably with 95C06F2T?

A: Both E-Switch parts are electrically equivalent to the 95C06F2T, sharing identical SPST-NO circuit configuration and 0.05A @ 12VDC contact rating. However, they differ in actuator height (6.90mm and 10.00mm respectively versus 7.30mm) and outline dimensions (7.20mm x 7.20mm versus 6.20mm x 6.20mm). Mechanical compatibility must be verified against PCB layout and enclosure constraints before substitution.

Q: What are the key differences between the two E-Switch substitutes?

A: TL6100CF130QP features a 6.90mm actuator height, while TL6100DF130QP features a 10.00mm actuator height. Both share identical electrical ratings, operating force (130gf), switch travel (0.50mm), and temperature range (-40°C to 85°C). Selection depends on vertical clearance requirements and actuator accessibility needs.

Q: Are there any operating force differences I should consider?

A: The 95C06F2T operates at 100gf, while both E-Switch substitutes operate at 130gf. This 30gf increase may affect tactile feedback perception and user actuation effort. Verify that the application can accommodate this difference in switch activation force.

Q: Do the substitute parts have different temperature ratings?

A: Yes. The 95C06F2T operates from -25°C to 70°C, while both E-Switch substitutes operate from -40°C to 85°C. The E-Switch parts provide extended low-temperature performance and higher maximum operating temperature, suitable for wider environmental applications.

Q: What is the significance of the different switch travel specifications?

A: The 95C06F2T has 0.25mm switch travel, while both E-Switch substitutes have 0.50mm travel. This affects the tactile response and mechanical stroke distance. Applications sensitive to switch travel distance should verify compatibility before substitution.

Q: Are all parts RoHS3 compliant?

A: Yes. The 95C06F2T and both E-Switch substitutes (TL6100CF130QP and TL6100DF130QP) are RoHS3 compliant and REACH unaffected, meeting identical environmental regulatory requirements.

Q: What packaging differences exist between these parts?

A: The 95C06F2T is supplied in Bag packaging, while both E-Switch substitutes are supplied in Tube packaging. This affects handling, storage, and component dispensing procedures but does not impact electrical or mechanical functionality.