Grayhill 95C06D4T Tactile Switch SPST-NO Equivalent & Substitute Parts

Part Overview

The Grayhill 95C06D4T is an active-status tactile switch featuring SPST-NO (Single Pole Single Throw - Normally Open) circuit configuration with 0.05A contact rating at 12VDC. This through-hole mounted component delivers tactile feedback with 260gf operating force and 500,000 mechanical cycle life. The part is ROHS3 compliant and REACH unaffected, making it suitable for industrial and commercial applications requiring reliable momentary switching functionality.

Equivalent and substitute parts are necessary when addressing supply chain constraints, inventory optimization, or when design specifications permit operation within alternative electrical and mechanical parameter ranges.

Substiute Parts

95C06D4T

Grayhill Inc.In Stock: 78695C06D4T Datasheet

Current PartRFQ

1-1825910-5

TE Connectivity ALCOSWITCH SwitchesIn Stock: 11511-1825910-5 Datasheet

SimilarRFQ

ADTS65RV

APEM Inc.In Stock: 2426ADTS65RV Datasheet

SimilarRFQ

TL6100CF130QP

E-SwitchIn Stock: 818TL6100CF130QP Datasheet

SimilarRFQ

TL6100DF130QP

E-SwitchIn Stock: 1797TL6100DF130QP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95C06D4T is determined by strict alignment with the following critical parameters:

Primary Compatibility Criteria:

• Circuit configuration: SPST-NO
• Switch function: Off-Mom (momentary operation)
• Mounting type: Through Hole
• Actuator orientation: Top Actuated
• Termination style: PC Pin
• Contact rating: 0.05A minimum at operating voltage
• RoHS3 compliance and MSL 1 rating

Secondary Compatibility Criteria:

• Actuator height tolerance: ±1.50mm from 9.50mm baseline
• Outline dimensions: ±0.50mm tolerance
• Operating force: ±50gf tolerance
• Switch travel: ±0.25mm tolerance
• Operating temperature range: Must encompass -25°C to 70°C minimum

The substitute parts listed below meet all primary criteria and fall within acceptable secondary parameter ranges for direct PCB-level substitution without design modification.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Identical Electrical and Mechanical Parameters):

ADTS65RV (APEM Inc.) provides full parameter equivalence to the 95C06D4T. Both components share identical contact rating (0.05A @ 12VDC), actuator height (9.50mm), outline dimensions (6.20mm x 6.20mm), operating force (260gf), switch travel (0.25mm), and operating temperature range (-25°C ~ 70°C). ROHS3 compliance and MSL 1 rating are maintained. This substitute requires no design modification and supports direct PCB-level replacement.

Conditional Substitutes (Parameter Variations Within Tolerance):

TL6100CF130QP and TL6100DF130QP (E-Switch) are conditionally suitable when design specifications permit reduced operating force (130gf versus 260gf) and increased switch travel (0.50mm versus 0.25mm). The TL6100CF130QP features a reduced actuator height of 6.90mm, requiring PCB layout verification. The TL6100DF130QP maintains 10.00mm actuator height, within acceptable tolerance. Both E-Switch variants offer extended mechanical life (1,000,000 cycles) and broader operating temperature range (-40°C ~ 85°C). Outline dimensions increase to 7.20mm x 7.20mm, necessitating footprint compatibility assessment. ROHS3 compliance and MSL 1 rating are maintained.

1-1825910-5 (TE Connectivity ALCOSWITCH) is suitable only for applications operating at 24VDC or lower voltage systems where 12VDC operation is not required. Contact rating remains 0.05A, but voltage specification differs. Actuator height (9.50mm) and operating force (260gf) align with the primary part. Outline dimensions (6.00mm x 6.00mm) are within tolerance. Mechanical life is reduced to 100,000 cycles. Extended operating temperature range (-40°C ~ 105°C) provides thermal margin. ROHS3 compliance and MSL 1 rating are maintained.

All substitute parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring regulatory and environmental compatibility with the original 95C06D4T specification.

Frequently Asked Questions (FAQ)

Q: Can ADTS65RV replace 95C06D4T without any design changes?

A: Yes. ADTS65RV matches all critical electrical and mechanical parameters of the 95C06D4T, including contact rating (0.05A @ 12VDC), actuator height (9.50mm), outline dimensions (6.20mm x 6.20mm), operating force (260gf), and switch travel (0.25mm). Direct PCB-level substitution is supported without design modification.

Q: What are the key differences between E-Switch TL6100 variants and the 95C06D4T?

A: TL6100CF130QP and TL6100DF130QP differ in three parameters: operating force is reduced from 260gf to 130gf, switch travel increases from 0.25mm to 0.50mm, and outline dimensions expand from 6.20mm x 6.20mm to 7.20mm x 7.20mm. TL6100CF130QP has a lower actuator height (6.90mm), while TL6100DF130QP maintains 10.00mm height. Both offer superior mechanical life (1,000,000 cycles) and extended temperature range (-40°C ~ 85°C).

Q: Is 1-1825910-5 compatible with 12VDC circuits?

A: 1-1825910-5 is rated for 0.05A @ 24VDC. While the contact rating supports 12VDC operation from an electrical standpoint, the part is specified for 24VDC systems. Use in 12VDC applications requires circuit design verification. Mechanical parameters (actuator height 9.50mm, operating force 260gf) align with the 95C06D4T. Mechanical life is significantly reduced to 100,000 cycles.

Q: What packaging formats are available for these substitutes?

A: 95C06D4T and 1-1825910-5 are supplied in Bag packaging. ADTS65RV is supplied in Bulk packaging. TL6100CF130QP and TL6100DF130QP are supplied in Tube packaging. Packaging selection affects inventory management and component handling procedures but does not impact electrical or mechanical performance.

Q: Do all substitute parts meet RoHS3 and MSL requirements?

A: Yes. All listed substitute parts (ADTS65RV, TL6100CF130QP, TL6100DF130QP, and 1-1825910-5) are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the regulatory and environmental compliance profile of the 95C06D4T.

Q: Which substitute offers the longest mechanical life?

A: TL6100CF130QP and TL6100DF130QP both provide 1,000,000 mechanical cycles, compared to 500,000 cycles for the 95C06D4T. ADTS65RV does not specify mechanical life. 1-1825910-5 provides 100,000 cycles, the lowest among all options.

Q: Can TL6100CF130QP be used in space-constrained PCB layouts?

A: TL6100CF130QP has the lowest actuator height (6.90mm) among all options, making it suitable for applications with vertical clearance constraints. However, its outline dimensions (7.20mm x 7.20mm) are larger than the 95C06D4T (6.20mm x 6.20mm), requiring horizontal footprint verification before substitution.