Equivalent & Substitute Parts for 95C06C4GWRT

Part Overview

The Grayhill Inc. 95C06C4GWRT is an active-status tactile switch featuring SPST-NO (Single Pole Single Throw Normally Open) circuit configuration with momentary off operation. This surface-mount component is rated for 0.05A at 12VDC and incorporates tactile feedback with a 260gf operating force. The part is supplied in Tape & Reel packaging with 883 units currently in stock.

Equivalent and substitute parts are identified to address application requirements including alternative actuator heights, packaging formats, and mechanical life specifications while maintaining core electrical and mechanical compatibility within the tactile switch category.

Key Parameters

Parameter	Value
Manufacturer Part Number	95C06C4GWRT
Manufacturer	Grayhill Inc.
Series	95C
Circuit Configuration	SPST-NO
Switch Function	Off-Mom (Momentary)
Contact Rating	0.05A @ 12VDC
Mounting Type	Surface Mount
Actuator Height (Vertical)	7.00mm
Actuator Orientation	Top Actuated
Termination Style	Gull Wing
Outline Dimensions	6.20mm x 6.20mm
Operating Force	260gf
Operating Temperature Range	-25°C ~ 70°C
Switch Travel	0.25mm
Mechanical Life	500,000 Cycles
Actuator Material	Polyamide (PA), Nylon
Packaging	Tape & Reel (TR)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
REACH Status	REACH Unaffected
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts are classified based on electrical and mechanical parameter alignment with the 95C06C4GWRT. The primary substitution criteria are:

Core Electrical Parameters (Non-Negotiable):

Circuit configuration: SPST-NO
Switch function: Off-Mom (Momentary)
Contact rating: 0.05A @ 12VDC
Termination style: Gull Wing
Mounting type: Surface Mount
Top actuated orientation

Mechanical Parameters (Allowable Variation):

Actuator height: 4.30mm to 13.00mm (accommodates different PCB clearance requirements)
Operating force: 65gf to 260gf (application-dependent selection)
Outline dimensions: 6.00mm x 6.00mm to 6.20mm x 6.20mm (minor footprint variation)
Switch travel: 0.25mm (consistent across all parts)

Packaging and Compliance (Flexible):

Packaging format: Tape & Reel, Tube, or Cut Tape & Digi-Reel
RoHS3 compliance: Required
MSL Level 1: Required
REACH Unaffected: Required

Substitutes are grouped by operating force and actuator height to facilitate selection based on specific application constraints.

Parameter Comparison

Parameter	95C06C4GWRT (Main)	ADTSM63RV	LL3301NF065QG	TL3301AF100QG	TL3301AF260QG	TL3301BF160QGTUBE	TL3301BF260QGTUBE	TL3301CF160QG	TL3301DF260QG	TL3301EF100QG	TL3301EF160QG
Manufacturer	Grayhill Inc.	APEM Inc.	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch
Circuit Configuration	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO
Switch Function	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom
Contact Rating	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Actuator Height (mm)	7.00	7.00	4.30	5.00	5.00	9.50	9.50	8.00	13.00	7.30	7.30
Actuator Orientation	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated
Termination Style	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing
Outline Dimensions (mm)	6.20 x 6.20	6.20 x 6.20	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00
Operating Force (gf)	260	260	65	100	260	160	260	160	260	100	160
Operating Temperature Range	-25°C ~ 70°C	-25°C ~ 70°C	-30°C ~ 85°C	-20°C ~ 70°C	-20°C ~ 70°C	-20°C ~ 70°C	-20°C ~ 70°C	-20°C ~ 70°C	-20°C ~ 70°C	-20°C ~ 70°C	-20°C ~ 70°C
Switch Travel (mm)	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25
Mechanical Life (Cycles)	500,000	Not Specified	Not Specified	100,000	100,000	100,000	100,000	100,000	100,000	100,000	100,000
Actuator Material	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Not Specified	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon
Packaging	Tape & Reel (TR)	Bulk	Tape & Reel (TR)	Tape & Reel (TR)	Tape & Reel (TR)	Tube	Tube	Cut Tape & Digi-Reel	Tape & Reel (TR)	Cut Tape & Digi-Reel	Tape & Reel (TR)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full compliance with ROHS3, MSL Level 1, and REACH Unaffected requirements. Selection among substitutes is determined by application-specific mechanical requirements.

Direct Electrical Equivalents (Identical Operating Force and Height):

ADTSM63RV (APEM Inc.) provides direct functional equivalence to the 95C06C4GWRT with matching 260gf operating force and 7.00mm actuator height. This part differs only in packaging format (Bulk versus Tape & Reel) and is suitable for applications where packaging flexibility is acceptable.

Operating Force Variants:

E-Switch TL3301 series parts offer multiple operating force options: 65gf (LL3301NF065QG), 100gf (TL3301AF100QG, TL3301EF100QG), 160gf (TL3301BF160QGTUBE, TL3301CF160QG, TL3301EF160QG), and 260gf (TL3301AF260QG, TL3301BF260QGTUBE, TL3301DF260QG). Selection is based on required actuation force for the target application.

Actuator Height Variants:

Actuator height ranges from 4.30mm (LL3301NF065QG) to 13.00mm (TL3301DF260QG), accommodating varying PCB clearance and overlay requirements. The 95C06C4GWRT operates at 7.00mm; substitutes with 7.30mm height (TL3301EF100QG, TL3301EF160QG) provide near-identical clearance profiles.

Packaging Considerations:

Tape & Reel packaging (95C06C4GWRT, TL3301AF100QG, TL3301AF260QG, TL3301DF260QG, TL3301EF160QG) is standard for automated assembly. Tube packaging (TL3301BF160QGTUBE, TL3301BF260QGTUBE) and Cut Tape & Digi-Reel (TL3301CF160QG, TL3301EF100QG) accommodate alternative handling and inventory requirements.

Mechanical Life Consideration:

The 95C06C4GWRT specifies 500,000 mechanical cycles. E-Switch TL3301 series parts specify 100,000 cycles. Applications requiring extended cycle life should retain the 95C06C4GWRT or ADTSM63RV (mechanical life not specified but equivalent design).

Frequently Asked Questions (FAQ)

Q: Can TL3301 series parts with different operating forces substitute for the 95C06C4GWRT?

A: Yes, provided the application can accommodate the different operating force. The 95C06C4GWRT operates at 260gf. TL3301AF260QG and TL3301BF260QGTUBE and TL3301DF260QG maintain this force specification. Lower force variants (65gf, 100gf, 160gf) are substitutes only if the application does not require the higher actuation force of the original part.

Q: What is the impact of actuator height differences on PCB design?

A: Actuator height determines clearance above the PCB surface. The 95C06C4GWRT at 7.00mm requires minimum 7.00mm clearance. Shorter variants (4.30mm to 5.00mm) reduce clearance requirements; taller variants (8.00mm to 13.00mm) increase clearance requirements. Overlay and enclosure design must accommodate the selected height.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant status and REACH Unaffected designation, meeting regulatory requirements equivalent to the 95C06C4GWRT.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel, Tube, and Cut Tape & Digi-Reel packaging formats do not alter electrical or mechanical performance. Selection is based on assembly process requirements and inventory management.

Q: What is the significance of MSL Level 1 rating?

A: MSL Level 1 indicates unlimited shelf life without moisture bake-out requirements. All listed parts carry this rating, eliminating moisture sensitivity constraints during storage and handling.

Q: Can the ADTSM63RV replace the 95C06C4GWRT in production?

A: Yes, for applications where Bulk packaging is acceptable. The ADTSM63RV matches all electrical and mechanical specifications of the 95C06C4GWRT, differing only in packaging format.

Q: Which substitute offers the closest dimensional match to the 95C06C4GWRT?

A: ADTSM63RV provides identical outline dimensions (6.20mm x 6.20mm) and actuator height (7.00mm). E-Switch TL3301 series parts feature slightly smaller outline dimensions (6.00mm x 6.00mm) with variable actuator heights.

Q: Are there operating temperature range differences among substitutes?

A: Yes. The 95C06C4GWRT operates from -25°C to 70°C. ADTSM63RV matches this range. E-Switch TL3301 series parts operate from -20°C to 70°C (narrower low-temperature range). LL3301NF065QG extends to -30°C to 85°C (wider range). Application temperature requirements determine suitability.

Q: What mechanical life specification should be considered for high-cycle applications?

A: The 95C06C4GWRT specifies 500,000 mechanical cycles. E-Switch TL3301 series parts specify 100,000 cycles. Applications exceeding 100,000 cycles should retain the 95C06C4GWRT or ADTSM63RV (mechanical life unspecified).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message