Equivalent & Substitute Parts for 95C06C2T Tactile Switch

Part Overview

The Grayhill 95C06C2T is an SPST-NO tactile switch designed for low-voltage applications requiring momentary contact operation. This through-hole mounted component operates at 0.05A @ 12VDC with tactile feedback and is classified as Active product status. Substitute parts are identified to address inventory availability, packaging preferences, or specific mechanical height requirements while maintaining electrical and functional compatibility.

Substiute Parts

95C06C2T

Grayhill Inc.In Stock: 86195C06C2T Datasheet

Current PartRFQ

TL6100CF130QP

E-SwitchIn Stock: 818TL6100CF130QP Datasheet

SimilarRFQ

TL6100DF130QP

E-SwitchIn Stock: 1797TL6100DF130QP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 95C06C2T are qualified based on the following criteria:

Mandatory Matching Parameters:

• Circuit configuration: SPST-NO
• Contact rating: 0.05A @ 12VDC
• Switch function: Off-Mom (momentary operation)
• Mounting type: Through Hole
• Termination style: PC Pin
• Actuator orientation: Top Actuated
• Actuator material: Polyamide (PA), Nylon
• Illumination: Non-Illuminated
• RoHS compliance: ROHS3 Compliant
• Mechanical life: 1,000,000 Cycles

Allowable Variation Parameters:

• Actuator height off PCB: Variation permitted within mechanical design constraints
• Outline dimensions: Minor variation acceptable if footprint compatibility maintained
• Operating temperature range: Extended range acceptable (substitute may exceed original specification)
• Operating force: Variation acceptable within tactile feedback tolerance
• Switch travel: Variation acceptable within functional requirements
• Packaging format: Tube or Bag acceptable for equivalent electrical performance

The substitute parts TL6100CF130QP and TL6100DF130QP from E-Switch meet all mandatory matching criteria and are classified as direct electrical equivalents with documented mechanical variations.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

The 95C06C2T remains the preferred component when the original specification of 7.00mm actuator height and 6.20mm x 6.20mm outline footprint are required for PCB layout compatibility.

Substitute Selection Logic:

TL6100CF130QP (E-Switch) is suitable for applications where:

• Actuator height of 6.90mm is mechanically compatible with design constraints
• Outline footprint of 7.20mm x 7.20mm accommodates PCB layout
• Extended operating temperature range (-40°C ~ 85°C) provides environmental margin
• Process sealed construction is acceptable
• Higher operating force (130gf vs. 100gf) is compatible with user interface requirements

TL6100DF130QP (E-Switch) is suitable for applications where:

• Actuator height of 10.00mm is required for increased mechanical clearance or accessibility
• Outline footprint of 7.20mm x 7.20mm accommodates PCB layout
• Extended operating temperature range (-40°C ~ 85°C) provides environmental margin
• Process sealed construction is acceptable
• Higher operating force (130gf vs. 100gf) is compatible with user interface requirements
• Taller actuator profile is functionally advantageous

Compliance Verification:

All three parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating. Electrical specifications are identical across all three options. Mechanical life rating of 1,000,000 cycles is consistent.

Frequently Asked Questions (FAQ)

Q: Can TL6100CF130QP or TL6100DF130QP be used as direct replacements for 95C06C2T?

A: Both E-Switch parts are electrical equivalents with identical circuit configuration, contact rating, and switch function. Mechanical compatibility depends on PCB layout constraints. The TL6100CF130QP has a 6.90mm actuator height (0.10mm lower than original), while TL6100DF130QP has a 10.00mm actuator height (3.00mm higher). Outline dimensions differ by 1.00mm in each direction (7.20mm vs. 6.20mm). Verify PCB clearance and footprint accommodation before substitution.

Q: What is the difference between TL6100CF130QP and TL6100DF130QP?

A: Both parts are from the E-Switch TL6100 series with identical electrical specifications. The primary difference is actuator height: TL6100CF130QP provides 6.90mm height, while TL6100DF130QP provides 10.00mm height. Select based on mechanical clearance requirements and user interface accessibility needs.

Q: Are there packaging differences between the main part and substitutes?

A: Yes. The 95C06C2T is supplied in Bag packaging, while both E-Switch substitutes (TL6100CF130QP and TL6100DF130QP) are supplied in Tube packaging. This affects handling, storage, and component counting procedures but does not impact electrical or functional performance.

Q: Do the substitute parts have different operating force specifications?

A: Yes. The 95C06C2T operates at 100gf, while both E-Switch substitutes operate at 130gf. This 30gf increase in operating force may be perceptible in tactile feedback but remains within standard tactile switch operating ranges. Verify that the higher actuation force is compatible with intended user interface application.

Q: What is the significance of the extended operating temperature range in substitute parts?

A: The E-Switch substitutes operate from -40°C to 85°C, compared to the 95C06C2T range of -25°C to 70°C. The extended range provides additional environmental margin and is suitable for applications requiring broader temperature tolerance. This specification difference does not prevent substitution in applications within the original temperature range.

Q: Are the switch travel differences significant?

A: The 95C06C2T has 0.25mm switch travel, while E-Switch substitutes have 0.50mm travel. This difference affects tactile response characteristics and may be noticeable in user interface applications. Verify that the increased travel distance is compatible with mechanical design constraints and user experience requirements.

Q: Do all parts meet the same regulatory compliance standards?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. Regulatory compliance is equivalent across all options.