Equivalent & Substitute Parts for 95C06B5GWRT

Part Overview

The Grayhill 95C06B5GWRT is an active-status tactile switch featuring SPST-NO (Single Pole Single Throw, Normally Open) circuit configuration with 0.05A contact rating at 12VDC. This surface-mount component delivers tactile feedback through a 320gf operating force with 0.25mm switch travel and 300,000 mechanical cycle life. The part is RoHS Compliant, REACH Unaffected, and classified as MSL 1 (Unlimited moisture sensitivity level).

Substitute parts are necessary when design requirements specify alternative actuator heights, different operating force profiles, packaging format constraints, or when primary component availability is limited. The substitute parts listed maintain electrical equivalence while offering mechanical variations to accommodate specific application requirements.

Key Parameters

Parameter	Value
Manufacturer Part Number	95C06B5GWRT
Manufacturer	Grayhill Inc.
Series	95C
Product Status	Active
Circuit Configuration	SPST-NO
Switch Function	Off-Mom (Momentary)
Contact Rating	0.05A @ 12VDC
Mounting Type	Surface Mount
Actuator Height (Vertical)	5.00mm
Actuator Orientation	Top Actuated
Termination Style	Gull Wing
Outline Dimensions	6.20mm x 6.20mm
Operating Force	320gf
Switch Travel	0.25mm
Mechanical Life	300,000 Cycles
Operating Temperature Range	-25°C ~ 70°C
Actuator Material	Polyamide (PA), Nylon
Illumination	Non-Illuminated
RoHS Status	RoHS Compliant
MSL Rating	1 (Unlimited)
REACH Status	REACH Unaffected
ECCN	EAR99
HTSUS Code	8536.50.9031

Substitute Part Grouping Explanation

Substitution eligibility for the 95C06B5GWRT is determined by strict electrical and mechanical parameter alignment. All substitute parts maintain the following core electrical specifications:

Mandatory Electrical Equivalence Parameters:

Circuit Configuration: SPST-NO
Switch Function: Off-Mom (Momentary)
Contact Rating: 0.05A @ 12VDC
Termination Style: Gull Wing
Mounting Type: Surface Mount
Actuator Orientation: Top Actuated
Switch Travel: 0.25mm
Illumination: Non-Illuminated

Mechanical Variation Parameters (Allowed Differences):

Actuator Height: Ranges from 4.30mm to 13.00mm
Operating Force: Ranges from 65gf to 260gf
Outline Dimensions: 6.00mm x 6.00mm (substitute standard) versus 6.20mm x 6.20mm (main part)
Mechanical Life: 100,000 to 300,000 cycles
Operating Temperature: -30°C ~ 85°C to -20°C ~ 70°C
Packaging Format: Tape & Reel, Tube, or Cut Tape & Digi-Reel

All substitute parts are manufactured by E-Switch and carry ROHS3 Compliant status with REACH Unaffected and EAR99 ECCN classifications, maintaining regulatory equivalence with the primary component.

Parameter Comparison

Parameter	95C06B5GWRT (Main)	LL3301NF065QG	TL3301AF100QG	TL3301AF260QG	TL3301BF160QGTUBE	TL3301BF260QGTUBE	TL3301CF160QG	TL3301DF260QG	TL3301EF100QG	TL3301EF160QG	TL3301EF260QG
Manufacturer	Grayhill Inc.	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch	E-Switch
Circuit Configuration	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO
Contact Rating	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC	0.05A @ 12VDC
Switch Function	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom	Off-Mom
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Actuator Height (mm)	5.00	4.30	5.00	5.00	9.50	9.50	8.00	13.00	7.30	7.30	7.30
Actuator Orientation	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated	Top Actuated
Termination Style	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing
Outline Dimensions (mm)	6.20 x 6.20	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00	6.00 x 6.00
Operating Force (gf)	320	65	100	260	160	260	160	260	100	160	260
Switch Travel (mm)	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25
Mechanical Life (Cycles)	300,000	Not Specified	100,000	100,000	100,000	100,000	100,000	100,000	100,000	100,000	100,000
Operating Temperature (°C)	-25 ~ 70	-30 ~ 85	-20 ~ 70	-20 ~ 70	-20 ~ 70	-20 ~ 70	-20 ~ 70	-20 ~ 70	-20 ~ 70	-20 ~ 70	-20 ~ 70
Actuator Material	Polyamide (PA), Nylon	Not Specified	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon	Polyamide (PA), Nylon
Illumination	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated	Non-Illuminated
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99

Engineering Selection Recommendations

All listed substitute parts maintain full electrical equivalence to the 95C06B5GWRT and are suitable for direct functional replacement in SPST-NO momentary switch applications rated at 0.05A @ 12VDC. Selection among substitute options is determined by application-specific mechanical requirements and packaging constraints.

For Identical Actuator Height (5.00mm): TL3301AF100QG and TL3301AF260QG provide direct mechanical compatibility with the main part's 5.00mm actuator height. These parts are available in Tape & Reel packaging and carry ROHS3 Compliant status with 100,000 mechanical cycle life.

For Reduced Actuator Height (4.30mm): LL3301NF065QG offers the lowest profile option at 4.30mm actuator height with 65gf operating force. This part is available in Tape & Reel packaging and extends the operating temperature range to -30°C ~ 85°C. Mechanical life specification is not provided for this variant.

For Increased Actuator Height Applications: TL3301CF160QG (8.00mm), TL3301BF160QGTUBE and TL3301BF260QGTUBE (9.50mm), and TL3301DF260QG (13.00mm) accommodate applications requiring elevated actuator profiles. These variants are available in Tube or Cut Tape & Digi-Reel packaging formats.

For Operating Force Variations: Operating force options range from 65gf (LL3301NF065QG) to 260gf (TL3301AF260QG, TL3301BF260QGTUBE, TL3301DF260QG, TL3301EF260QG). Selection of operating force is application-dependent and does not affect electrical circuit performance.

For Packaging Format Requirements: Tape & Reel packaging is available for LL3301NF065QG, TL3301AF100QG, TL3301AF260QG, TL3301DF260QG, TL3301EF100QG, TL3301EF160QG, and TL3301EF260QG. Tube packaging is available for TL3301BF160QGTUBE and TL3301BF260QGTUBE. Cut Tape & Digi-Reel packaging is available for TL3301CF160QG and TL3301EF100QG.

All substitute parts carry ROHS3 Compliant, REACH Unaffected, and EAR99 ECCN classifications, maintaining regulatory compliance with the primary component.

Frequently Asked Questions (FAQ)

Q: Can TL3301AF100QG be used as a direct replacement for 95C06B5GWRT?

A: TL3301AF100QG is electrically equivalent and maintains the same 5.00mm actuator height as the 95C06B5GWRT. Both parts feature SPST-NO circuit configuration, 0.05A @ 12VDC contact rating, 0.25mm switch travel, and Gull Wing termination. The primary difference is the operating force: TL3301AF100QG operates at 100gf compared to the main part's 320gf. Mechanical life is 100,000 cycles versus 300,000 cycles for the main part. Selection depends on whether the application requires the higher operating force and extended cycle life of the original component.

Q: What is the difference between Tape & Reel and Tube packaging options?

A: Tape & Reel packaging is suitable for automated pick-and-place assembly processes and high-volume production environments. Tube packaging is typically used for manual assembly or lower-volume applications. Both packaging formats contain the same electrical and mechanical components; the difference is in handling and dispensing method. Outline dimensions and electrical specifications remain identical across packaging variants.

Q: Why does LL3301NF065QG have a lower operating force (65gf) than the main part (320gf)?

A: Operating force is a mechanical characteristic that determines the pressure required to actuate the switch. Lower operating force (65gf) requires less finger pressure to activate, while higher operating force (320gf) requires greater pressure. The choice between these variants depends on the application's ergonomic and tactile feedback requirements. Both maintain identical electrical performance at 0.05A @ 12VDC.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts listed carry ROHS3 Compliant status. The main part 95C06B5GWRT carries RoHS Compliant status. Both designations indicate compliance with Restriction of Hazardous Substances regulations. All parts are REACH Unaffected and classified as EAR99 for export control purposes.

Q: What is the significance of the 6.00mm x 6.00mm outline versus the main part's 6.20mm x 6.20mm outline?

A: The outline dimension refers to the physical footprint of the component on the printed circuit board. The main part occupies a 6.20mm x 6.20mm area, while all E-Switch substitute parts occupy a 6.00mm x 6.00mm area. This 0.20mm reduction in each dimension may affect PCB layout compatibility. Verify that the PCB design accommodates the smaller footprint before selecting a substitute part with the reduced outline dimension.

Q: Can TL3301DF260QG with 13.00mm actuator height be used in applications designed for the 5.00mm main part?

A: TL3301DF260QG is electrically equivalent but features a significantly taller actuator profile (13.00mm versus 5.00mm). This part is suitable only for applications where increased actuator height is required or acceptable. The taller profile may interfere with enclosure design, overlay panels, or mechanical constraints in applications designed for the original 5.00mm height. Verify mechanical clearance before substitution.

Q: What is the MSL rating and why is it important?

A: MSL (Moisture Sensitivity Level) 1 (Unlimited) indicates that the component has unlimited shelf life and does not require special moisture-controlled storage or handling procedures. All listed parts carry MSL 1 rating, meaning they can be stored and handled under standard environmental conditions without degradation of electrical or mechanical performance.

Q: How do I select the correct operating force for my application?

A: Operating force selection depends on the intended user interaction and application requirements. Lower operating forces (65gf to 100gf) are suitable for applications requiring light touch activation. Mid-range forces (160gf) provide moderate tactile feedback. Higher forces (260gf to 320gf) are used in applications requiring deliberate, intentional activation to prevent accidental triggering. Consult application documentation to determine the appropriate operating force specification.

Q: Are the substitute parts available in the same quantities as the main part?

A: Inventory levels vary by part number and packaging format. TL3301BF160QGTUBE and TL3301BF260QGTUBE offer the highest inventory availability (32,660 and 29,797 units respectively). TL3301EF260QG has the lowest availability (2,133 units). Verify current inventory status for the specific part number required for your application timeline.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message