Equivalent & Substitute Parts for 95C06B2T

Part Overview

The 95C06B2T is a tactile switch manufactured by Grayhill Inc., classified as SPST-NO (Single Pole Single Throw - Normally Open) with a contact rating of 0.05A at 12VDC. This through-hole mounted component features top actuation, polyamide actuator material, and tactile feedback characteristics. The part is Active in product status and ROHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter range.

Substiute Parts

95C06B2T

Grayhill Inc.In Stock: 91495C06B2T Datasheet

Current PartRFQ

ADTS62KV

APEM Inc.In Stock: 866ADTS62KV Datasheet

SimilarRFQ

TL6100CF130QP

E-SwitchIn Stock: 818TL6100CF130QP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 95C06B2T are identified based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Electrical Compatibility:

• Circuit configuration must be SPST-NO
• Contact rating must be 0.05A @ 12VDC
• Switch function must be Off-Mom (Momentary)

Mechanical Compatibility:

• Mounting type must be Through Hole
• Actuator orientation must be Top Actuated
• Termination style must be PC Pin
• Actuator material must be Polyamide (PA), Nylon

Physical Constraints:

• Outline dimensions and actuator height determine PCB layout compatibility
• Operating force and switch travel affect user interface feel but do not prevent substitution

Compliance Requirements:

• RoHS3 compliance required
• MSL rating of 1 (Unlimited) required
• REACH Unaffected status required

Two substitute parts meet these criteria with documented parameter alignment.

Parameter Comparison

Engineering Selection Recommendations

ADTS62KV (APEM Inc.) - Direct Equivalent

The ADTS62KV provides electrical and mechanical equivalence to the 95C06B2T. Both parts share identical contact ratings, circuit configuration, actuator height, outline dimensions, operating force, and switch travel. The ADTS62KV is ROHS3 compliant with MSL rating 1 (Unlimited) and REACH Unaffected status. This part is suitable for direct substitution in applications where the 95C06B2T is specified. Packaging differs (Bulk vs. Bag), which may affect procurement and handling procedures.

TL6100CF130QP (E-Switch) - Functional Equivalent with Parameter Variations

The TL6100CF130QP maintains electrical equivalence (SPST-NO, 0.05A @ 12VDC, Off-Mom function) and core mechanical compatibility (Through Hole, Top Actuated, PC Pin termination, Polyamide actuator). However, this part exhibits the following parameter differences:

• Actuator height: 6.90mm (vs. 5.00mm on 95C06B2T)
• Outline dimensions: 7.20mm x 7.20mm (vs. 6.20mm x 6.20mm)
• Operating force: 130gf (vs. 100gf)
• Switch travel: 0.50mm (vs. 0.25mm)
• Operating temperature range: -40°C ~ 85°C (vs. -25°C ~ 70°C)

The TL6100CF130QP is ROHS3 compliant with MSL rating 1 (Unlimited) and REACH Unaffected status. Selection of this part requires verification that PCB layout accommodates the larger footprint and increased actuator height, and that the higher operating force and extended switch travel are acceptable for the application.

Frequently Asked Questions (FAQ)

Q: Can ADTS62KV be used as a direct replacement for 95C06B2T?

A: Yes. The ADTS62KV matches all critical electrical parameters (SPST-NO, 0.05A @ 12VDC), mechanical mounting characteristics (Through Hole, Top Actuated, PC Pin), and physical dimensions (5.00mm height, 6.20mm x 6.20mm outline). Both parts are ROHS3 compliant with MSL 1 (Unlimited). The primary difference is packaging format (Bulk vs. Bag).

Q: What are the limitations of using TL6100CF130QP as a substitute?

A: The TL6100CF130QP differs in three physical parameters: actuator height (6.90mm vs. 5.00mm), outline dimensions (7.20mm x 7.20mm vs. 6.20mm x 6.20mm), and operating force (130gf vs. 100gf). These differences may affect PCB layout compatibility and user interface feel. The extended operating temperature range (-40°C ~ 85°C) provides broader environmental capability than the 95C06B2T (-25°C ~ 70°C).

Q: Are all substitute parts RoHS3 compliant?

A: Yes. Both ADTS62KV and TL6100CF130QP are ROHS3 compliant with MSL rating 1 (Unlimited) and REACH Unaffected status, matching the compliance profile of the 95C06B2T.

Q: Does packaging format affect electrical or mechanical performance?

A: No. Packaging format (Bag, Bulk, or Tube) affects procurement, storage, and handling procedures but does not alter electrical performance or mechanical compatibility. Selection should be based on supply chain requirements and inventory management practices.

Q: What is the significance of operating force and switch travel differences?

A: Operating force (100gf vs. 130gf) and switch travel (0.25mm vs. 0.50mm) affect the tactile feedback and actuation characteristics perceived by the user. These parameters do not prevent electrical or mechanical substitution but should be evaluated for user interface consistency in the target application.

Q: Can mechanical life specifications be used as a substitution criterion?

A: Mechanical life is provided for 95C06B2T (1,000,000 cycles) and TL6100CF130QP (1,000,000 cycles) but is not specified for ADTS62KV. The absence of this specification does not disqualify ADTS62KV as a substitute; it indicates that this parameter was not documented in the available data. Electrical and mechanical compatibility remain the primary substitution criteria.