Amphenol ICC 95736-104 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95736-104 is a through-hole, right-angle rectangular connector header with 4 positions at 0.100" (2.54mm) pitch. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing design and procurement requirements. The connector features shrouded 4-wall construction with solder termination and friction lock fastening, suitable for board-to-cable/wire applications.

Substiute Parts

95736-104

Amphenol ICC (FCI)In Stock: 110295736-104 Datasheet

Current PartRFQ

95736-104LF

Amphenol ICC (FCI)In Stock: 98195736-104LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 95736-104 is based on electrical and mechanical compatibility within the Clincher™ series. The primary substitute, 95736-104LF, maintains identical specifications across all critical parameters: connector type, contact configuration, pitch, position count, mounting orientation, shrouding design, termination method, and fastening mechanism. Both parts share the same contact material (Phosphor Bronze), mating finish (Gold at 30.0µin thickness), insulation material (Plastic), and flammability rating (UL94 V-0).

The key differentiator is product status and compliance: the 95736-104 is obsolete, while 95736-104LF is active. The suffix "LF" indicates lead-free compliance, reflected in the RoHS Compliant status of the substitute versus the non-compliant status of the original part.

Parameter Comparison

Engineering Selection Recommendations

The 95736-104LF is the direct active equivalent for the obsolete 95736-104. Both parts are mechanically and electrically interchangeable across all specified parameters. The primary distinction is regulatory compliance: the 95736-104LF carries RoHS Compliant status, making it suitable for applications subject to RoHS directives, while the original part does not meet this requirement.

For new designs or procurement of replacement inventory, the 95736-104LF should be selected. The part maintains identical mechanical fit, electrical performance, and thermal characteristics as the original, with the added benefit of active product status and lead-free compliance certification.

Frequently Asked Questions (FAQ)

Q: Are the 95736-104 and 95736-104LF mechanically interchangeable?

A: Yes. Both parts share identical mounting type (through hole, right angle), shrouding configuration (4-wall), contact post length (0.120"), insulation height (0.203"), and all other mechanical dimensions. PCB footprints and mating interface dimensions are identical.

Q: What does the "LF" suffix indicate?

A: The "LF" suffix denotes lead-free composition and RoHS compliance. The 95736-104LF meets RoHS Compliant requirements, whereas the 95736-104 does not.

Q: Can I use 95736-104LF in applications originally designed for 95736-104?

A: Yes. The electrical and mechanical specifications are identical. The 95736-104LF is a direct substitute suitable for all applications previously using the 95736-104.

Q: What is the pitch specification for these connectors?

A: Both parts operate at 0.100" (2.54mm) pitch, which is the standard spacing between mating contacts and positions.

Q: Are there packaging differences between these parts?

A: The 95736-104 packaging is not specified in the data. The 95736-104LF is supplied in Bulk packaging.

Q: What is the contact current rating for the 95736-104LF?

A: The 95736-104LF is rated at 2A per contact. The current rating for the original 95736-104 is not specified in the available data.

Q: Why is the 95736-104 listed as obsolete?

A: Product obsolescence typically reflects manufacturer discontinuation. The active equivalent 95736-104LF should be used for all new procurement and design activities.