Amphenol ICC 95735-102 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95735-102 is a rectangular connector header designed for through-hole mounting in board-to-cable/wire applications. This connector features a 2-position, single-row configuration with 0.100" (2.54mm) pitch and shrouded 4-wall design. The part is classified as obsolete, making identification of suitable substitute components essential for ongoing design support and procurement continuity.

Substiute Parts

95735-102

Amphenol ICC (FCI)In Stock: 72295735-102 Datasheet

Current PartRFQ

IPL1-102-01-S-S-K

Samtec Inc.In Stock: 5368IPL1-102-01-S-S-K Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 95735-102 is based on strict equivalence of the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Mating pitch (0.100" / 2.54mm)
• Position count (2 positions)
• Row configuration (1 row)
• Shrouding design (Shrouded - 4 Wall)
• Mounting method (Through Hole)
• Application style (Board to Cable/Wire)
• Contact material and finish (Phosphor Bronze with Gold mating finish)
• Flammability compliance (UL94 V-0)

The Samtec Inc. IPL1-102-01-S-S-K meets all these criteria and qualifies as a direct substitute. Both connectors maintain identical mating pitch, position count, shrouding configuration, and mounting characteristics. Contact material, finish specifications, and flammability ratings are equivalent between the two parts.

Parameter Comparison

Engineering Selection Recommendations

The Samtec Inc. IPL1-102-01-S-S-K is the qualified substitute for the obsolete Amphenol ICC 95735-102. Selection of the IPL1-102-01-S-S-K provides the following advantages:

• Active product status ensures ongoing availability and manufacturing support
• ROHS3 compliance meets current regulatory requirements, whereas the original part is RoHS non-compliant
• Operating temperature range of -55°C to 125°C and voltage rating of 675VAC / 954VDC are specified for the substitute
• Liquid Crystal Polymer (LCP) insulation material provides enhanced thermal and chemical resistance compared to standard plastic
• All critical mating and mechanical parameters remain identical to the original design

The substitute maintains full electrical and mechanical compatibility with existing PCB layouts and mating connectors designed for the 95735-102.

Frequently Asked Questions (FAQ)

Q: Are the 95735-102 and IPL1-102-01-S-S-K mechanically interchangeable?

A: Yes. Both connectors share identical mating pitch (0.100" / 2.54mm), position count (2), row configuration (1), shrouding design (4-wall), and post length (0.120" / 3.05mm). PCB footprints and mating connector interfaces are compatible.

Q: What is the primary difference between these two connectors?

A: The IPL1-102-01-S-S-K is an active product with ROHS3 compliance, whereas the 95735-102 is obsolete and RoHS non-compliant. The substitute uses Liquid Crystal Polymer (LCP) for insulation instead of standard plastic, offering improved thermal stability.

Q: Can the IPL1-102-01-S-S-K be used in applications originally designed for the 95735-102?

A: Yes. The substitute meets or exceeds all critical electrical and mechanical specifications of the original part. The enhanced material properties and active product status make it suitable for direct replacement in existing designs.

Q: What packaging is available for the substitute part?

A: The IPL1-102-01-S-S-K is supplied in tube packaging.

Q: Are there any termination differences between the two parts?

A: The 95735-102 uses kinked pin solder termination, while the IPL1-102-01-S-S-K uses standard solder termination. Both are suitable for through-hole PCB assembly.