Amphenol ICC 95672-001LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95672-001LF is a modular jack connector (8p8c/RJ45) designed for Ethernet applications with 90° right-angle orientation and shielded construction. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing design support, procurement continuity, and system maintenance. Substitute parts must maintain electrical compatibility with Cat5 Ethernet standards while preserving mechanical fit and termination characteristics.

Substiute Parts

95672-001LF

Amphenol ICC (FCI)In Stock: 79795672-001LF Datasheet

Current PartRFQ

7499011001A

Würth ElektronikIn Stock: 9517499011001A Datasheet

MFR RecommendedRFQ

SS-7188S-A-NF-1-50

Stewart ConnectorIn Stock: 1011SS-7188S-A-NF-1-50 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following critical parameters:

Primary Compatibility Criteria:

• Connector type: Jack (8p8c/RJ45)
• Mounting configuration: Through hole, 90° right-angle orientation
• Termination method: Solder
• Shielding: Shielded construction
• Tab direction: Down
• Contact finish: Gold plating
• Housing material: Thermoplastic

Secondary Compatibility Criteria:

• Operating temperature range: Minimum -40°C to maximum ≥70°C
• Moisture sensitivity: MSL 1 (Unlimited)
• RoHS compliance status
• Contact finish thickness: ≥30.0µin (0.76µm)

The identified substitute parts meet these criteria while maintaining active product status and current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

Würth Elektronik 7499011001A: This substitute provides active product status with extended operating temperature range (-40°C to 85°C). The part includes EMI finger shielding and supports 10/100 Base-T with AutoMDIX functionality. Contact finish thickness matches the original specification at 30.0µin. ROHS3 compliance and REACH unaffected status provide regulatory alignment for current procurement requirements.

Stewart Connector SS-7188S-A-NF-1-50: This substitute maintains closest mechanical and electrical alignment with the original 95672-001LF, including identical 8p8c/RJ45 connector designation and Cat5e rating. The part features enhanced contact finish thickness at 50.0µin (1.27µm), providing increased durability. Extended operating temperature range (-40°C to 85°C) and ROHS3 compliance support modern design standards. Board lock feature is retained from the original design.

Both substitutes are currently in active production with confirmed inventory availability and meet all primary compatibility criteria for direct replacement in through-hole PCB applications.

Frequently Asked Questions (FAQ)

Q: Can the Würth Elektronik 7499011001A replace the Amphenol ICC 95672-001LF in existing designs? A: Yes. Both parts share identical mounting configuration (through hole, 90° right-angle), termination method (solder), shielding type (shielded), and tab direction (down). The Würth part extends the operating temperature range to 85°C and includes EMI finger shielding. Contact finish thickness and gold plating specifications are equivalent.

Q: What is the difference between the two substitute options? A: The Stewart Connector SS-7188S-A-NF-1-50 provides the closest functional match to the original part, including identical 8p8c/RJ45 designation and Cat5e rating. The Würth Elektronik 7499011001A offers additional EMI filtering and AutoMDIX functionality for 10/100 Base-T applications. Both support identical through-hole solder termination and shielded construction.

Q: Are there packaging differences between the main part and substitutes? A: Yes. The original 95672-001LF packaging is not specified. The Würth Elektronik 7499011001A is supplied in tube packaging, while the Stewart Connector SS-7188S-A-NF-1-50 is supplied in bulk packaging. Procurement quantities and handling procedures may require adjustment based on packaging format.

Q: Do the substitute parts maintain RoHS compliance? A: Yes. Both substitute parts are ROHS3 compliant. The original 95672-001LF is RoHS compliant. The Stewart Connector part includes REACH unaffected status, and the Würth Elektronik part is REACH unaffected, supporting regulatory requirements for current manufacturing and distribution.

Q: What is the significance of contact finish thickness differences? A: The original part and Würth Elektronik substitute specify 30.0µin (0.76µm) contact finish thickness. The Stewart Connector substitute provides 50.0µin (1.27µm) thickness, offering enhanced contact durability and wear resistance. Both thicknesses exceed minimum gold plating requirements for Ethernet connector applications.

Q: Can these parts be used interchangeably in Cat5 and Cat5e applications? A: The original 95672-001LF is rated for Cat5. The Stewart Connector SS-7188S-A-NF-1-50 is rated for Cat5e. The Würth Elektronik 7499011001A supports 10/100 Base-T with AutoMDIX. All three parts are mechanically and electrically compatible for through-hole solder termination in shielded RJ45 applications. Application-specific performance requirements should be verified against system specifications.