Equivalent & Substitute Parts for 95296-510LF

Part Overview

The 95296-510LF is a 10-position rectangular receptacle connector manufactured by Amphenol ICC (FCI) in the Dubox™ series. This through-hole connector features 0.100" (2.54mm) pitch, gold-plated mating contacts, and push-pull fastening. The part is Active status and RoHS Compliant, designed for board-to-board or cable applications requiring reliable interconnection in standard pitch configurations. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component sourcing flexibility while maintaining functional compatibility.

Key Parameters

Parameter	Value
Connector Type	Receptacle, Bottom or Top Entry
Contact Type	Female Socket
Number of Positions	10
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Contact Finish - Mating	Gold
Fastening Type	Push-Pull
Insulation Height	0.276" (7.00mm)
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the 95296-510LF is determined by strict alignment of the following critical parameters:

10-position configuration with all positions loaded
0.100" (2.54mm) mating pitch
Female socket contact type
Through-hole mounting with solder termination
Push-pull fastening mechanism
Gold-plated mating contacts
0.276" (7.00mm) insulation height
UL94 V-0 flammability rating
MSL 1 (Unlimited) moisture sensitivity

The identified substitutes meet these core requirements. Variations in secondary parameters such as contact material, contact finish thickness, insulation material composition, and post contact finish do not preclude functional substitution when the primary electrical and mechanical interfaces remain compatible.

Parameter Comparison

Parameter	95296-510LF (Amphenol ICC)	1-215297-0 (TE Connectivity)	801-93-010-10-001000 (Mill-Max)
Manufacturer	Amphenol ICC (FCI)	TE Connectivity AMP Connectors	Mill-Max Manufacturing Corp.
Series	Dubox™	AMPMODU HV-100	801
Connector Type	Receptacle, Bottom or Top Entry	Receptacle	Receptacle
Contact Type	Female Socket	Female Socket	Female Socket
Number of Positions	10	10	10
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole
Termination	Solder	Kinked Pin, Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull
Contact Finish - Mating	Gold	Gold	Gold
Contact Finish Thickness - Mating	78.7µin (2.00µm)	31.5µin (0.80µm)	30.0µin (0.76µm)
Insulation Height	0.276" (7.00mm)	0.276" (7.00mm)	0.276" (7.00mm)
Contact Length - Post	0.118" (3.00mm)	0.122" (3.10mm)	0.118" (3.00mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Phosphor Bronze	Phosphor Bronze	Beryllium Copper
Insulation Material	Polycyclohexylenedimethylene Terephthalate (PCT), Glass Filled	Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active

Engineering Selection Recommendations

All three parts maintain Active product status and meet UL94 V-0 flammability requirements with MSL 1 classification. The 95296-510LF and 801-93-010-10-001000 share identical contact post length (0.118" / 3.00mm), while 1-215297-0 specifies 0.122" (3.10mm). The 95296-510LF and 1-215297-0 both use phosphor bronze contacts, whereas 801-93-010-10-001000 employs beryllium copper. Contact finish thickness on mating surfaces varies across the three options, with 95296-510LF providing the thickest gold plating at 78.7µin (2.00µm). All parts are RoHS compliant and carry unlimited moisture sensitivity ratings, supporting deployment in standard industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can 1-215297-0 substitute for 95296-510LF despite the 0.004" (0.10mm) difference in contact post length?

A: The contact post length difference of 0.004" (0.10mm) between 1-215297-0 (0.122") and 95296-510LF (0.118") falls within typical PCB through-hole tolerance ranges. Substitution is functionally compatible for standard board-to-board applications where solder joint depth accommodates this variation.

Q: What is the significance of the contact material difference between phosphor bronze and beryllium copper in 801-93-010-10-001000?

A: Both materials provide equivalent electrical conductivity and mechanical durability for 0.100" pitch receptacle applications. Beryllium copper in 801-93-010-10-001000 offers enhanced spring characteristics and contact force consistency. Material selection does not affect functional substitution capability.

Q: Why does 95296-510LF specify thicker gold plating (78.7µin) compared to the substitute parts?

A: Gold plating thickness variations reflect different manufacturer specifications for contact durability and mating cycle performance. All three parts exceed minimum gold plating requirements for reliable electrical contact. Thicker plating in 95296-510LF provides extended contact life in high-cycle applications.

Q: Are there packaging differences that affect component handling or assembly?

A: 95296-510LF is supplied in Tube packaging, while 1-215297-0 and 801-93-010-10-001000 are supplied in Bulk packaging. Packaging format does not affect electrical or mechanical compatibility; selection depends on assembly process requirements and inventory management practices.

Q: Can these parts be intermixed in the same application?

A: Yes. All three parts share identical mating pitch (0.100"), insulation height (0.276"), connector type (receptacle), contact type (female socket), and fastening mechanism (push-pull). Intermixing is mechanically and electrically compatible in board-to-board or cable applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message