Amphenol ICC 95293-402-06LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95293-402-06LF is a surface mount rectangular connector header with 6 positions at 0.100" (2.54mm) pitch. This BERGSTIK® series component is designed for board-to-board applications with male pin contacts and push-pull fastening. The part is currently active in production with 1172 pieces in stock. Substitute parts may be required due to supply chain constraints, packaging preferences, or specific application requirements such as contact finish specifications or operating temperature ranges.

Key Parameters

Parameter	Value
Connector Type	Header, Breakaway
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	6
Number of Rows	1
Mounting Type	Surface Mount
Termination	Solder
Fastening Type	Push-Pull
Contact Material	Phosphor Bronze
Current Rating	3A
Operating Temperature	-65°C ~ 130°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the 95293-402-06LF is determined by the following critical parameters:

Connector Type & Contact Configuration: Header, Breakaway with Male Pin contacts
Pitch & Position Count: 0.100" (2.54mm) pitch with 6 positions in single row
Mounting & Termination: Surface mount with solder termination
Fastening Mechanism: Push-Pull fastening type
Contact Material: Phosphor Bronze construction
Current & Temperature Ratings: 3A current capacity with operating range compatibility
Compliance Standards: UL94 V-0 flammability rating and RoHS compliance

The substitute parts GBC06SFBN-M30 and GEC06SFBN-M30 from Sullins Connector Solutions meet these core electrical and mechanical parameters. Variations in contact finish specifications and operating temperature upper limits represent acceptable engineering trade-offs within the allowed parameter set.

Parameter Comparison

Parameter	95293-402-06LF (Amphenol ICC)	GBC06SFBN-M30 (Sullins)	GEC06SFBN-M30 (Sullins)
Connector Type	Header, Breakaway	Header, Breakaway	Header, Breakaway
Contact Type	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	6	6	6
Number of Rows	1	1	1
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Termination	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Current Rating	3A	3A	3A
Operating Temperature	-65°C ~ 130°C	-65°C ~ 150°C	-65°C ~ 150°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Material	Thermoplastic	Polyamide (PA9T), Nylon 9T	Polyamide (PA9T), Nylon 9T
Contact Finish - Mating	Tin (78.7µin / 2.00µm)	Gold (10.0µin / 0.25µm)	Tin (100.0µin / 2.54µm)
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bag	Bulk	Bulk
Inventory Status	1172 Pcs In Stock	917 Pcs In Stock	866 Pcs In Stock

Engineering Selection Recommendations

GBC06SFBN-M30 is the primary substitute option. This part maintains full electrical and mechanical compatibility with the 95293-402-06LF while offering an extended operating temperature range to 150°C. The gold mating contact finish provides enhanced corrosion resistance compared to the tin finish of the original part. ROHS3 compliance and bulk packaging are available. Current inventory is 917 pieces.

GEC06SFBN-M30 is an alternative substitute with tin mating contact finish matching the original part specification. This part is discontinued at DiGi Electronics but remains available with 866 pieces in stock. The extended operating temperature range to 150°C and ROHS3 compliance are equivalent to GBC06SFBN-M30. Selection of this part should account for its discontinued status in the distribution channel.

Both substitute parts are manufactured by Sullins Connector Solutions and meet all core mechanical, electrical, and compliance requirements for direct substitution in applications currently using the Amphenol ICC 95293-402-06LF.

Frequently Asked Questions (FAQ)

Q: Can GBC06SFBN-M30 and GEC06SFBN-M30 be used interchangeably with 95293-402-06LF?

A: Yes, both parts are mechanically and electrically compatible. The primary differences are contact finish specifications (gold vs. tin) and insulation material composition (Polyamide PA9T vs. Thermoplastic). These differences do not affect mating compatibility or electrical performance in standard applications.

Q: What is the significance of the contact finish difference between the parts?

A: The 95293-402-06LF uses tin plating at 78.7µin (2.00µm) thickness. GBC06SFBN-M30 uses gold plating at 10.0µin (0.25µm), offering superior corrosion resistance. GEC06SFBN-M30 uses tin plating at 100.0µin (2.54µm), providing thicker protection than the original part. Contact finish selection depends on environmental exposure and connector cycling requirements.

Q: Are there packaging differences between these parts?

A: Yes. The 95293-402-06LF is supplied in bag packaging, while both Sullins substitutes are supplied in bulk packaging. Bulk packaging may require reel or tape-and-reel handling for automated assembly processes.

Q: What is the difference in operating temperature range?

A: The 95293-402-06LF operates from -65°C to 130°C. Both substitute parts extend the upper limit to 150°C. If your application operates within the original -65°C to 130°C range, this difference is not a limiting factor.

Q: Why is GEC06SFBN-M30 marked as discontinued?

A: GEC06SFBN-M30 is discontinued at DiGi Electronics but remains available through inventory. For new designs or long-term supply planning, GBC06SFBN-M30 is the recommended choice due to its active product status.

Q: Are all three parts RoHS compliant?

A: Yes. The 95293-402-06LF is RoHS Compliant. Both GBC06SFBN-M30 and GEC06SFBN-M30 are ROHS3 Compliant, representing the current RoHS standard revision.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message