Amphenol ICC 95293-402-05LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95293-402-05LF is a surface mount rectangular connector header with 5 positions at 0.100" (2.54mm) pitch. This breakaway header is designed for board-to-board applications with male pin contacts and solder termination. The part is currently active in production with 767 units in stock. Substitute parts may be required due to supply chain constraints, packaging preferences, or specific application requirements such as contact finish specifications or operating temperature ranges.

Substiute Parts

95293-402-05LF

Amphenol ICC (FCI)In Stock: 82195293-402-05LF Datasheet

Current PartRFQ

GBC05SFBN-M30

Sullins Connector SolutionsIn Stock: 1087GBC05SFBN-M30 Datasheet

MFR RecommendedRFQ

GEC05SFBN-M30

Sullins Connector SolutionsIn Stock: 1108GEC05SFBN-M30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95293-402-05LF is determined by the following critical parameters:

• Connector type (Header, Breakaway)
• Contact type (Male Pin)
• Number of positions (5)
• Pitch specification (0.100" / 2.54mm)
• Mounting type (Surface Mount)
• Termination method (Solder)
• Contact material (Phosphor Bronze)
• Current rating (3A)
• Material flammability rating (UL94 V-0)

The identified substitute parts GBC05SFBN-M30 and GEC05SFBN-M30 from Sullins Connector Solutions meet all critical substitution criteria. Both parts maintain identical mechanical and electrical specifications for mating pitch, position count, contact type, and current rating. Variations exist in contact finish specifications and operating temperature ranges, which are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

Both Sullins Connector Solutions parts are functionally equivalent to the Amphenol ICC 95293-402-05LF for standard board-to-board applications. Selection between alternatives should be based on the following factors:

GBC05SFBN-M30 is the primary substitute option. This part maintains active product status and offers an extended operating temperature range (-65°C ~ 150°C versus -65°C ~ 130°C). The gold contact finish provides enhanced corrosion resistance compared to the tin finish of the original part. Both parts carry ROHS3 compliance and identical current ratings.

GEC05SFBN-M30 is a secondary substitute option. This part is discontinued at DiGi Electronics and should be selected only when GBC05SFBN-M30 is unavailable. The tin contact finish matches the original part specification more closely, though the operating temperature range remains extended to 150°C.

All three parts maintain UL94 V-0 flammability ratings, unlimited moisture sensitivity levels, and identical mechanical dimensions for mating interfaces.

Frequently Asked Questions (FAQ)

Q: Can GBC05SFBN-M30 and GEC05SFBN-M30 be used interchangeably with 95293-402-05LF?

A: Yes, both Sullins parts are mechanically and electrically compatible. All three connectors share identical mating pitch (0.100"), position count (5), contact type (male pin), current rating (3A), and mounting configuration (surface mount solder termination). The primary differences are contact finish specifications and insulation material composition.

Q: What is the difference between the tin and gold contact finishes?

A: The 95293-402-05LF and GEC05SFBN-M30 use tin contact finish. The GBC05SFBN-M30 uses gold contact finish with reduced thickness (10.0µin versus 78.7µin or 100.0µin). Gold provides superior corrosion resistance and is preferred for applications requiring extended shelf life or exposure to corrosive environments. Tin finish is suitable for standard applications with normal environmental conditions.

Q: Why do the substitute parts have a higher operating temperature range?

A: The Sullins parts are rated to -65°C ~ 150°C, compared to -65°C ~ 130°C for the Amphenol ICC part. This extended range reflects the thermal capabilities of the Polyamide (PA9T) insulation material used in the Sullins connectors. Applications operating within the original -65°C ~ 130°C range are fully compatible with either substitute.

Q: What is the packaging difference between these parts?

A: The 95293-402-05LF is supplied in bag packaging. Both Sullins substitute parts (GBC05SFBN-M30 and GEC05SFBN-M30) are supplied in bulk packaging. Packaging format does not affect connector performance or compatibility.

Q: Is GEC05SFBN-M30 still available for new designs?

A: GEC05SFBN-M30 is discontinued at DiGi Electronics. For new designs, GBC05SFBN-M30 is the recommended substitute, as it maintains active product status and offers equivalent or superior specifications.

Q: Do all three parts meet RoHS compliance requirements?

A: Yes. The 95293-402-05LF is RoHS Compliant. Both Sullins substitutes (GBC05SFBN-M30 and GEC05SFBN-M30) are ROHS3 Compliant, which represents the current RoHS standard. All parts are suitable for applications requiring RoHS compliance.