Equivalent & Substitute Parts for 95293-401-09LF

Part Overview

The Amphenol ICC 95293-401-09LF is a surface mount rectangular connector header with 9 positions at 0.100" (2.54mm) pitch. This BERGSTIK® series component is designed for board-to-board applications and is currently in active production status. Finding equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate varying procurement requirements across manufacturing environments.

Substiute Parts

95293-401-09LF

Amphenol ICC (FCI)In Stock: 70695293-401-09LF Datasheet

Current PartRFQ

GEC09SABN-M30

Sullins Connector SolutionsIn Stock: 1299GEC09SABN-M30 Datasheet

MFR RecommendedRFQ

M20-8770942

Harwin Inc.In Stock: 2405M20-8770942 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95293-401-09LF is determined by strict alignment with the following core parameters: 9-position configuration, 0.100" (2.54mm) mating pitch, surface mount technology, solder termination, male pin contact type, 3A current rating per contact, UL94 V-0 flammability rating, and board-to-board or board-to-cable application compatibility.

The two qualified substitute parts—GEC09SABN-M30 (Sullins Connector Solutions) and M20-8770942 (Harwin Inc.)—meet these fundamental electrical and mechanical requirements. Both maintain identical position count, pitch spacing, mounting method, and current handling capacity. Variations in contact finish material, insulation polymer composition, and operating temperature ranges represent acceptable engineering trade-offs within the rectangular connector category, provided the application thermal and environmental constraints remain within the specified limits of the selected substitute.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and comply with RoHS and REACH regulatory frameworks applicable to rectangular connectors. The 95293-401-09LF and GEC09SABN-M30 share identical operating temperature lower limits (-65°C) and both achieve UL94 V-0 certification with unlimited moisture sensitivity rating.

Selection between the main part and substitutes depends on application-specific thermal requirements. The GEC09SABN-M30 supports operation to 150°C, providing extended high-temperature capability. The M20-8770942 operates within a narrower range (-40°C ~ 105°C) and incorporates gold mating contact finish with brass contact material, suitable for applications requiring enhanced corrosion resistance or specific contact metallurgy requirements.

All three parts are certified to ECCN EAR99 and share identical HTSUS classification (8536.69.4040), confirming regulatory equivalence for export and trade purposes.

Frequently Asked Questions (FAQ)

Q: Can GEC09SABN-M30 be used as a direct replacement for 95293-401-09LF?

A: Yes, provided the application operating temperature does not exceed 130°C. The GEC09SABN-M30 maintains all critical electrical parameters: 9 positions, 0.100" pitch, 3A current rating, surface mount solder termination, and UL94 V-0 flammability rating. The higher temperature rating (150°C) of the substitute provides additional thermal margin.

Q: What are the key differences between the M20-8770942 and the main part?

A: The M20-8770942 features gold mating contact finish and brass contact material versus tin finish and phosphor bronze in the 95293-401-09LF. The operating temperature range is narrower (-40°C ~ 105°C). The connector type is cuttable rather than breakaway. These differences are acceptable for applications operating within the M20-8770942 temperature limits and where gold contact finish provides design advantage.

Q: Are there packaging differences between these parts?

A: The 95293-401-09LF is supplied in bag packaging, while both GEC09SABN-M30 and M20-8770942 are supplied in bulk packaging. This affects handling and inventory management but does not impact electrical or mechanical compatibility.

Q: Do all three parts meet the same regulatory compliance standards?

A: All three parts are UL94 V-0 rated, RoHS compliant, REACH classified, and assigned ECCN EAR99. The 95293-401-09LF carries RoHS Compliant status, while the substitutes carry ROHS3 Compliant status, both meeting current regulatory requirements. All share identical HTSUS classification.

Q: What is the significance of the contact finish thickness differences?

A: The 95293-401-09LF and GEC09SABN-M30 specify tin contact finish thickness at 78.7µin (2.00µm) and 100.0µin (2.54µm) respectively. These variations fall within acceptable engineering tolerances for tin-plated connectors and do not affect functional compatibility or current-carrying capacity at the 3A rating.