Amphenol ICC 95293-401-05LF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95293-401-05LF is a surface mount rectangular connector header with 5 positions at 0.100" (2.54mm) pitch. This BERGSTIK® series component features male pins, unshrouded design, and solder termination for board-to-board applications. The part is Active status and RoHS Compliant, with 716 units currently in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, ensuring design flexibility and supply chain continuity.

Substiute Parts

95293-401-05LF

Amphenol ICC (FCI)In Stock: 82195293-401-05LF Datasheet

Current PartRFQ

GBC05SABN-M30

Sullins Connector SolutionsIn Stock: 2588GBC05SABN-M30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95293-401-05LF is determined by strict alignment of the following critical parameters:

• Connector Type: Header, Breakaway
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 5
• Number of Rows: 1
• Mounting Type: Surface Mount
• Termination: Solder
• Current Rating: 3A
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute part GBC05SABN-M30 from Sullins Connector Solutions meets all critical electrical and mechanical parameters. Variations in contact finish material, insulation material composition, and operating temperature range do not preclude substitution when application requirements fall within the specified operating envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 95293-401-05LF and Sullins GBC05SABN-M30 are Active status products with full RoHS compliance. The 95293-401-05LF carries RoHS Compliant certification, while the GBC05SABN-M30 meets ROHS3 Compliant standards, representing equivalent regulatory compliance for rectangular connector applications.

Selection between these parts should be based on:

• Supply availability and lead time requirements
• Contact finish preference (tin versus gold plating)
• Insulation material compatibility with specific assembly processes
• Operating temperature margin requirements within the -65°C to 130°C application envelope

Both parts satisfy UL94 V-0 flammability requirements and MSL 1 moisture sensitivity specifications, confirming suitability for standard PCB assembly and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can GBC05SABN-M30 directly replace 95293-401-05LF in existing designs?

A: Yes. Both parts share identical pitch (0.100"), position count (5), row configuration (1), mounting type (surface mount), termination method (solder), and current rating (3A). Mechanical and electrical compatibility is confirmed.

Q: What is the significance of the contact finish difference (tin versus gold)?

A: Contact finish affects corrosion resistance and mating cycle durability. Tin plating (95293-401-05LF) provides standard performance for general applications. Gold plating (GBC05SABN-M30) offers enhanced corrosion resistance in high-humidity or corrosive environments. Selection depends on application environmental exposure.

Q: Does the insulation material difference impact performance?

A: Insulation material composition (Thermoplastic versus Polyamide PA9T/Nylon 9T) affects mechanical properties and thermal stability. Both materials meet UL94 V-0 flammability requirements. Material selection should align with assembly process temperatures and mechanical stress requirements.

Q: Are both parts suitable for high-temperature applications?

A: The 95293-401-05LF operates to 130°C, while GBC05SABN-M30 operates to 150°C. For applications requiring sustained operation above 130°C, the Sullins part provides additional thermal margin. For applications below 130°C, both parts are equivalent.

Q: What packaging considerations apply to these parts?

A: The 95293-401-05LF is supplied in Bag packaging (716 units in stock), while GBC05SABN-M30 is supplied in Bulk packaging (2507 units in stock). Packaging format does not affect component performance or compatibility.

Q: Are both parts RoHS compliant?

A: Yes. The 95293-401-05LF is RoHS Compliant, and GBC05SABN-M30 is ROHS3 Compliant. Both meet current regulatory requirements for lead-free and restricted substance compliance.