Amphenol ICC 95293-401-04LF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95293-401-04LF is an active surface mount rectangular connector header designed for board-to-board applications. This 4-position, single-row connector operates across a wide temperature range and meets UL94 V-0 flammability standards. Finding equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain compatibility across manufacturing batches while preserving electrical and mechanical performance.

Substiute Parts

95293-401-04LF

Amphenol ICC (FCI)In Stock: 117895293-401-04LF Datasheet

Current PartRFQ

GEC04SABN-M30

Sullins Connector SolutionsIn Stock: 4593GEC04SABN-M30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95293-401-04LF is determined by strict alignment of the following critical parameters:

• Connector type: Header, Breakaway configuration
• Contact type: Male Pin
• Position count: 4 positions in single row
• Pitch specification: 0.100" (2.54mm) mating pitch
• Mounting method: Surface Mount (SMD)
• Termination: Solder
• Current capacity: 3A minimum
• Flammability compliance: UL94 V-0
• Moisture sensitivity: MSL 1 or better
• RoHS compliance status

The substitute part GEC04SABN-M30 from Sullins Connector Solutions meets all these criteria, enabling direct functional equivalence in board-to-board applications.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 95293-401-04LF and Sullins GEC04SABN-M30 are active products with full compliance certifications. The Amphenol part carries RoHS Compliant status and REACH Affected designation. The Sullins substitute carries ROHS3 Compliant status and REACH Unaffected designation, indicating updated regulatory alignment.

The GEC04SABN-M30 provides an extended operating temperature range (-65°C to 150°C versus -65°C to 130°C), offering additional thermal margin for demanding applications. Both parts maintain identical electrical specifications, mechanical dimensions, and contact performance characteristics required for board-to-board connectivity.

Selection between these parts should be based on supply availability, regulatory requirements specific to your application region, and thermal operating conditions of the target system.

Frequently Asked Questions (FAQ)

Q: Can GEC04SABN-M30 be used as a direct replacement for 95293-401-04LF?

A: Yes. Both connectors share identical pitch (2.54mm), position count (4), contact type (male pin), mounting method (surface mount), current rating (3A), and flammability compliance (UL94 V-0). Mechanical and electrical compatibility is confirmed across all critical parameters.

Q: What is the difference in insulation material between these parts?

A: The Amphenol part uses Thermoplastic insulation, while the Sullins part uses Polyamide (PA9T) Nylon 9T. Both materials meet UL94 V-0 flammability requirements and provide equivalent functional performance in board-to-board applications.

Q: Does the extended temperature range of GEC04SABN-M30 affect compatibility?

A: No. The extended range (-65°C to 150°C versus -65°C to 130°C) represents a performance advantage. If your application operates within the original -65°C to 130°C specification, the Sullins part remains fully compatible and provides additional thermal margin.

Q: Are there packaging differences between these parts?

A: Yes. The Amphenol 95293-401-04LF is supplied in Bag packaging, while the Sullins GEC04SABN-M30 is supplied in Bulk packaging. Verify packaging requirements for your manufacturing process and inventory management procedures.

Q: What regulatory compliance should I verify for my application?

A: Both parts are RoHS compliant and carry EAR99 export classification. The Amphenol part is REACH Affected; the Sullins part is REACH Unaffected. Confirm REACH compliance requirements based on your end-use region and customer specifications.