Equivalent & Substitute Parts for 95293-101B03LF

Part Overview

The 95293-101B03LF is a surface mount rectangular connector header manufactured by Amphenol ICC (FCI) under the BERGSTIK® series. This 3-position, 0.100" (2.54mm) pitch connector is designed for board-to-board applications with solder termination and push-pull fastening. The part is currently active in production with 1146 units in stock. Substitute parts are necessary to address supply chain flexibility, alternative packaging requirements, or specific compliance certifications needed for particular applications.

Substiute Parts

95293-101B03LF

Amphenol ICC (FCI)In Stock: 116495293-101B03LF Datasheet

Current PartRFQ

GBC03SABN-M30

Sullins Connector SolutionsIn Stock: 5752GBC03SABN-M30 Datasheet

MFR RecommendedRFQ

GEC03SABN-M30

Sullins Connector SolutionsIn Stock: 4685GEC03SABN-M30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95293-101B03LF is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Header, Breakaway with Male Pin contacts
• Pitch & Position Count: 0.100" (2.54mm) pitch with 3 positions in single row
• Mounting & Termination: Surface mount with solder termination
• Mechanical Compatibility: Contact length (0.230"), insulation height (0.100"), square contact shape
• Electrical Performance: 3A current rating, phosphor bronze contact material
• Environmental Compliance: UL94 V-0 flammability rating, MSL 1, RoHS compliance

The two substitute parts listed—GBC03SABN-M30 and GEC03SABN-M30 (both from Sullins Connector Solutions)—meet all critical mechanical and electrical parameters. Differences exist in contact finish specifications and operating temperature ranges, which are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

Both GBC03SABN-M30 and GEC03SABN-M30 are functionally equivalent substitutes for the 95293-101B03LF based on core mechanical and electrical parameters. Selection between these options depends on specific application requirements:

GBC03SABN-M30 features gold plating on mating contacts (10.0µin thickness) and supports an extended operating temperature range of -65°C to 150°C. This part is suitable for applications requiring enhanced corrosion resistance or higher temperature operation within the specified range.

GEC03SABN-M30 features tin plating on mating contacts (100.0µin thickness) and also supports the extended operating temperature range of -65°C to 150°C. This option provides cost efficiency while maintaining full mechanical and electrical compatibility.

All three parts carry UL94 V-0 flammability certification, MSL 1 moisture sensitivity rating, and meet RoHS compliance requirements. The Sullins substitutes (GBC03SABN-M30 and GEC03SABN-M30) are ROHS3 compliant, representing current regulatory alignment. Both substitute parts are available in significantly higher quantities (5723 and 4603 units respectively) compared to the primary part.

Frequently Asked Questions (FAQ)

Q: Are GBC03SABN-M30 and GEC03SABN-M30 mechanically interchangeable with 95293-101B03LF?

A: Yes. All three parts share identical connector type, contact configuration, pitch (0.100"), position count (3), mounting type (surface mount), termination method (solder), and critical mechanical dimensions including contact length (0.230") and insulation height (0.100").

Q: What is the difference between the two Sullins substitutes?

A: The primary difference is contact finish on the mating surface. GBC03SABN-M30 uses gold plating (10.0µin), while GEC03SABN-M30 uses tin plating (100.0µin). Both support identical operating temperature ranges (-65°C to 150°C) and current ratings (3A).

Q: Does the contact finish difference affect electrical performance?

A: Contact finish affects corrosion resistance and long-term reliability in specific environments. Gold plating (GBC03SABN-M30) provides superior corrosion resistance in humid or corrosive environments. Tin plating (GEC03SABN-M30) is suitable for standard industrial applications. Both finishes meet the 3A current rating and maintain electrical integrity within specified operating conditions.

Q: Can I use these substitutes if my design specifies 95293-101B03LF?

A: Substitution is valid based on functional equivalence across all critical parameters. However, design documentation should be reviewed to confirm no application-specific requirements (such as specific contact finish, temperature range, or packaging format) mandate the original part number.

Q: What is the difference in packaging between the main part and substitutes?

A: The 95293-101B03LF is supplied in tube packaging, while both GBC03SABN-M30 and GEC03SABN-M30 are supplied in bulk packaging. Bulk packaging may require reel or tape-and-reel format for automated assembly processes. Confirm packaging compatibility with your procurement and assembly workflow.

Q: Are all three parts RoHS compliant?

A: Yes. The 95293-101B03LF is RoHS Compliant. Both GBC03SABN-M30 and GEC03SABN-M30 are ROHS3 Compliant, representing alignment with current regulatory standards.

Q: What is the operating temperature difference between the main part and substitutes?

A: The 95293-101B03LF operates from -65°C to 130°C. Both Sullins substitutes (GBC03SABN-M30 and GEC03SABN-M30) operate from -65°C to 150°C, providing a 20°C higher upper temperature limit. If your application operates within the 130°C to 150°C range, the Sullins parts provide extended capability.