Amphenol ICC 95264-304 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95264-304 is a 20-position receptacle connector with 0.100" (2.54mm) pitch, designed for board-to-board or cable applications using through-hole solder termination. This connector features gold-plated mating contacts, push-pull fastening, and UL94 V-0 rated insulation material.

The 95264-304 carries an obsolete product status. Identifying equivalent substitute parts ensures design continuity and maintains supply chain reliability for applications currently utilizing this connector.

Key Parameters

Parameter	Value
Connector Type	Receptacle, Bottom or Top Entry
Number of Positions	20
Number of Positions Loaded	18
Pitch - Mating	0.100" (2.54mm)
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Contact Finish Thickness - Mating	29.5µin (0.75µm)
Insulation Color	Blue
Insulation Height	0.276" (7.00mm)
Contact Length - Post	0.118" (3.00mm)
Material Flammability Rating	UL94 V-0
Contact Finish - Post	Tin
Insulation Material	Thermoplastic, Polyester, Glass Filled
Contact Shape	Square
Contact Material	Phosphor Bronze
Series	Dubox™
Base Product Number	95264

Substitute Part Grouping Explanation

Substitution of the 95264-304 is determined by strict equivalence across all electrical and mechanical parameters. The substitute part must maintain identical specifications for:

Connector type, position count, and row configuration
Mating pitch and row spacing (0.100" / 2.54mm)
Through-hole solder termination and push-pull fastening
Gold-plated mating contacts with specified thickness
Insulation material, color, and height
Contact geometry and material composition

The 95264-304LF qualifies as a direct substitute based on complete parameter alignment across all mechanical and electrical characteristics. The primary distinction between these parts is product status and regulatory compliance, not functional or dimensional equivalence.

Parameter Comparison

Parameter	95264-304	95264-304LF
Connector Type	Receptacle, Bottom or Top Entry	Receptacle, Bottom or Top Entry
Number of Positions	20	20
Number of Positions Loaded	18	18
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole
Termination	Solder	Solder
Fastening Type	Push-Pull	Push-Pull
Contact Finish - Mating	Gold	Gold
Contact Finish Thickness - Mating	29.5µin (0.75µm)	29.5µin (0.75µm)
Insulation Color	Blue	Blue
Insulation Height	0.276" (7.00mm)	0.276" (7.00mm)
Contact Length - Post	0.118" (3.00mm)	0.118" (3.00mm)
Material Flammability Rating	UL94 V-0	UL94 V-0
Contact Finish - Post	Tin	Tin
Insulation Material	Thermoplastic, Polyester, Glass Filled	Thermoplastic, Polyester, Glass Filled
Contact Shape	Square	Square
Contact Material	Phosphor Bronze	Phosphor Bronze
Series	Dubox™	Dubox™
Base Product Number	95264	95264
Product Status	Obsolete	Active
RoHS Status	RoHS non-compliant	RoHS Compliant
REACH Status	REACH Unaffected	REACH Affected
Packaging	-	Tube

Engineering Selection Recommendations

The 95264-304LF serves as the direct functional equivalent to the obsolete 95264-304. Both connectors are mechanically and electrically identical across all specified parameters.

Selection between these parts is determined by regulatory and compliance requirements:

The 95264-304LF is the preferred choice for new designs and ongoing production. This part carries active product status, ensuring long-term availability and supply chain stability. The 95264-304LF is RoHS compliant and REACH affected, meeting current environmental and regulatory standards applicable to electronic components in most markets.

The 95264-304 remains available for legacy system maintenance and repair applications where existing inventory exists. This part is RoHS non-compliant and REACH unaffected, reflecting its obsolete classification.

Both parts are functionally interchangeable at the connector interface level. PCB layout, mating connector specifications, and electrical performance remain identical between the two part numbers.

Frequently Asked Questions (FAQ)

Q: Are the 95264-304 and 95264-304LF mechanically interchangeable?

A: Yes. Both connectors share identical mechanical dimensions, pitch spacing, mounting configuration, and contact geometry. PCB footprints and mating connector compatibility are identical.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and regulatory compliance. The 95264-304LF is an active product with RoHS compliance, while the 95264-304 is obsolete and RoHS non-compliant. All electrical and mechanical specifications are identical.

Q: Can I use the 95264-304LF as a replacement for the 95264-304 in existing designs?

A: Yes. The 95264-304LF is a direct substitute with identical functional and dimensional specifications. No design modifications are required.

Q: What does the "LF" suffix in 95264-304LF indicate?

A: The "LF" designation indicates lead-free compliance, reflecting the part's RoHS compliant status.

Q: Why is the 95264-304 listed as obsolete?

A: The 95264-304 has been superseded by the 95264-304LF to meet current RoHS and environmental regulations. Amphenol ICC maintains the 95264-304LF as the active product for this connector series.

Q: Are there packaging differences between these parts?

A: The 95264-304LF is supplied in tube packaging. The 95264-304 packaging specification is not provided in the technical data.

Q: What is the contact finish specification for mating surfaces?

A: Both parts feature gold-plated mating contacts with a thickness of 29.5µin (0.75µm), ensuring consistent electrical performance and contact reliability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message