Amphenol ICC 95200-302 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95200-302 is a 3-position receptacle connector with 0.100" (2.54mm) pitch, designed for board-to-board applications using through-hole solder termination. This connector features gold-plated mating contacts and tin-plated posts, with a push-pull fastening mechanism and UL94 V-0 rated thermoplastic insulation.

The 95200-302 carries an obsolete product status. Locating equivalent substitute parts is necessary to maintain design continuity and ensure component availability for new production runs, repairs, and system upgrades.

Substiute Parts

95200-302

Amphenol ICC (FCI)In Stock: 99295200-302 Datasheet

Current PartRFQ

95200-302LF

Amphenol ICC (FCI)In Stock: 92295200-302LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95200-302 is determined by strict equivalence across the following critical parameters:

• Connector Type & Style: Receptacle, bottom or top entry, board-to-board configuration
• Electrical Interface: 3-position, 0.100" (2.54mm) pitch, female socket contacts
• Physical Interface: Through-hole solder termination, push-pull fastening
• Contact Specifications: Gold-plated mating surface (30.0µin thickness), tin-plated posts
• Material & Safety: Thermoplastic glass-filled insulation, UL94 V-0 flammability rating
• Series Compatibility: Dubox™ series

The substitute part 95200-302LF meets all these criteria, differing only in product status (active vs. obsolete) and regulatory compliance classifications.

Parameter Comparison

Engineering Selection Recommendations

The 95200-302LF is the direct active substitute for the obsolete 95200-302. Both connectors are identical in electrical and mechanical specifications, ensuring pin-for-pin and form-factor compatibility.

The primary distinction is regulatory compliance: the 95200-302LF carries RoHS Compliant and REACH Affected designations, whereas the original 95200-302 is RoHS non-compliant and REACH Unaffected. For new designs and production environments subject to RoHS or REACH regulations, the 95200-302LF is the appropriate selection. For legacy system maintenance where regulatory compliance is not a constraint, either part may be used interchangeably based on availability.

Both connectors are rated for automotive, general purpose, industrial, and telecommunications applications with identical environmental and safety certifications (UL94 V-0, MSL 1 - Unlimited).

Frequently Asked Questions (FAQ)

Q: Can the 95200-302LF be used as a direct replacement for the 95200-302?

A: Yes. The 95200-302LF is electrically and mechanically identical to the 95200-302. Both feature the same 3-position, 0.100" pitch configuration, gold-plated mating contacts, tin-plated posts, and through-hole solder termination. They are fully interchangeable in circuit design and PCB layout.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and regulatory compliance. The 95200-302 is obsolete and RoHS non-compliant, while the 95200-302LF is active and RoHS Compliant. The "LF" suffix typically indicates lead-free or compliance-oriented variants. Both connectors share identical electrical and mechanical specifications.

Q: Are there packaging differences between the 95200-302 and 95200-302LF?

A: The 95200-302LF is specified with bulk packaging, while the original 95200-302 packaging is not specified in the available data. This distinction affects procurement and handling but does not impact connector performance or compatibility.

Q: Which part should I specify for a new design?

A: Specify the 95200-302LF for new designs. It is the active product with current manufacturing support and regulatory compliance certifications (RoHS Compliant, REACH Affected). The 95200-302 is obsolete and should not be selected for new applications.

Q: Are both parts suitable for automotive and industrial applications?

A: Yes. Both the 95200-302 and 95200-302LF are rated for automotive, general purpose, industrial, and telecommunications applications. Both meet UL94 V-0 flammability requirements and carry MSL 1 (Unlimited) moisture sensitivity ratings, making them suitable for demanding environments.

Q: What is the contact finish specification?

A: Both connectors feature gold-plated mating contacts with 30.0µin (0.76µm) thickness and tin-plated posts. This finish combination provides reliable electrical contact and corrosion resistance for solder termination.