Amphenol ICC 95000-108 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95000-108 is a surface mount, right-angle rectangular connector header in the Minitek® series, designed for board-to-cable/wire applications. This 8-position connector operates at 2A (AC/DC) and 200V (AC/DC), featuring gold-plated mating contacts and tin-plated posts with a 2.00mm pitch. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing design support and procurement planning.

Substiute Parts

95000-108

Amphenol ICC (FCI)In Stock: 94995000-108 Datasheet

Current PartRFQ

95000-108LF

Amphenol ICC (FCI)In Stock: 117895000-108LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 95000-108LF qualifies as a direct substitute based on strict electrical and mechanical parameter alignment. Substitution eligibility is determined by the following critical parameters:

• Connector pitch: 0.079" (2.00mm) - identical
• Number of positions: 8 - identical
• Mounting configuration: Surface mount, right angle - identical
• Contact type: Male pin - identical
• Current rating: 2A (AC/DC) - identical
• Voltage rating: 200V (AC/DC) - identical
• Contact finish (mating): Gold, GXT™ - identical
• Material flammability: UL94 V-0 - identical
• Series: Minitek® - identical

The primary distinction is product status: the 95000-108LF is active and RoHS compliant, whereas the 95000-108 is obsolete and RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

The 95000-108LF is the appropriate substitute for the obsolete 95000-108. Both parts maintain identical electrical and mechanical specifications, ensuring functional compatibility in existing designs. The 95000-108LF offers the additional advantage of active product status and RoHS compliance, supporting long-term supply chain stability and regulatory alignment. For new designs or redesigns, the 95000-108LF should be specified to ensure continued availability and compliance with current environmental standards.

Frequently Asked Questions (FAQ)

Q: Are the 95000-108 and 95000-108LF mechanically interchangeable?

A: Yes. Both connectors share identical pitch (2.00mm), position count (8), mounting type (surface mount, right angle), and contact geometry. They are mechanically interchangeable in board layouts and mating applications.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and RoHS compliance. The 95000-108 is obsolete and RoHS non-compliant, while the 95000-108LF is active and RoHS compliant. All electrical and mechanical parameters are identical.

Q: Can I use the 95000-108LF in place of the 95000-108 in existing designs?

A: Yes. The 95000-108LF is a direct substitute with no design modifications required. Electrical performance, current/voltage ratings, and physical dimensions are identical.

Q: What does the "LF" suffix indicate?

A: The "LF" suffix indicates lead-free termination and RoHS compliance. This reflects the contact finish and material composition meeting RoHS directives.

Q: Are there any packaging differences between these parts?

A: The 95000-108 packaging is listed as unspecified, while the 95000-108LF is supplied in bulk packaging. This does not affect electrical or mechanical compatibility.

Q: What is the current and voltage rating for this connector?

A: The connector is rated for 2A (AC/DC) and 200V (AC/DC), supporting standard low-voltage signal and power distribution applications.