Amphenol ICC 95000-106 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 95000-106 is a surface mount, right-angle rectangular connector header in the Minitek® series, designed for board-to-cable/wire applications. This connector features 6 positions at 0.079" (2.00mm) pitch with shrouded design and solder termination. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement planning.

Substiute Parts

95000-106

Amphenol ICC (FCI)In Stock: 93795000-106 Datasheet

Current PartRFQ

95000-106LF

Amphenol ICC (FCI)In Stock: 101395000-106LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 95000-106LF is functionally equivalent to the main part based on the following critical parameters that determine substitutability:

• Connector Type & Series: Both are Minitek® series headers with identical male pin contact configuration
• Position Count & Pitch: Both feature 6 positions at 0.079" (2.00mm) mating pitch
• Mounting & Orientation: Both are surface mount, right-angle designs with identical shrouding (Shrouded - 1 Wall)
• Electrical Ratings: Both maintain 2A (AC/DC) current rating and 200V (AC/DC) voltage rating
• Contact Specifications: Both use gold-plated mating contacts (GXT™) with identical contact length and shape
• Material & Safety: Both meet UL94 V-0 flammability rating with thermoplastic insulation

The primary distinction is product status: 95000-106 is obsolete, while 95000-106LF is active. The "LF" suffix indicates lead-free compliance, reflecting the RoHS status difference between the two parts.

Parameter Comparison

Engineering Selection Recommendations

The 95000-106LF is the direct functional equivalent for the obsolete 95000-106. Selection between these parts should be based on regulatory and compliance requirements:

Use 95000-106LF when:

• RoHS compliance is required for new designs or procurement
• Active product support and availability are priorities
• REACH compliance is mandated by application or regional requirements

Use 95000-106 when:

• Existing inventory must be consumed for legacy system maintenance
• RoHS non-compliance is acceptable for the application
• Cost considerations favor existing stock utilization

Both parts maintain identical electrical performance, mechanical fit, and thermal characteristics. The substitution is direct with no design modifications required.

Frequently Asked Questions (FAQ)

Q: Can 95000-106LF be used as a direct replacement for 95000-106?

A: Yes. The parts are mechanically and electrically identical. The primary difference is RoHS compliance status and product lifecycle phase. No PCB layout or connector design changes are required.

Q: What does the "LF" suffix indicate?

A: The "LF" suffix denotes lead-free manufacturing, which aligns with RoHS Directive compliance. This reflects the contact finish and solder termination process used in the 95000-106LF variant.

Q: Are there any packaging differences between these parts?

A: The 95000-106 packaging is listed as unspecified in available data. The 95000-106LF is supplied in bulk packaging. Confirm packaging requirements with your procurement specification.

Q: What is the mating pitch, and does it affect compatibility?

A: Both parts use 0.079" (2.00mm) mating pitch. This pitch is fixed and determines compatibility with mating connectors. Any connector designed for 2.00mm pitch Minitek® headers will mate with either part.

Q: Are these parts suitable for high-current applications?

A: Both parts are rated for 2A (AC/DC) maximum current. For applications requiring higher current capacity, alternative connector series with higher current ratings must be evaluated.

Q: What is the operating temperature range?

A: Operating temperature data is not provided in the available specifications for either part. Consult the manufacturer's detailed datasheet for thermal operating limits.

Q: Can these connectors be used in applications requiring REACH compliance?

A: The 95000-106LF is marked as REACH Affected. The 95000-106 REACH status is not specified. For applications with REACH compliance mandates, use 95000-106LF and verify material declarations with the manufacturer.