Amphenol ICC 94910-101AMLF Modular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 94910-101AMLF is a Jack Modular Connector (RJ45/Ethernet) with 8p8c configuration, 90° right-angle orientation, and shielded design with EMI finger. This connector is rated for Cat3 applications and features through-hole solder termination with board lock functionality.

The 94910-101AMLF is classified as Obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this connector type.

Substiute Parts

94910-101AMLF

Amphenol ICC (FCI)In Stock: 74994910-101AMLF Datasheet

Current PartRFQ

SS-6488S-A-PG4-BA

Stewart ConnectorIn Stock: 5562SS-6488S-A-PG4-BA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 94910-101AMLF is determined by strict alignment of the following critical parameters:

• Connector Type & Configuration: Jack, 8p8c (RJ45/Ethernet), single port
• Physical Form Factor: Through-hole mounting, 90° right-angle orientation, down tab direction
• Electrical Interface: Solder termination with shielded, EMI finger design
• Mechanical Features: Board lock functionality
• Environmental Compliance: RoHS compliance status

The Stewart Connector SS-6488S-A-PG4-BA meets all mandatory substitution criteria across these parameters, establishing it as a direct functional equivalent for the obsolete Amphenol ICC part.

Parameter Comparison

Engineering Selection Recommendations

The Stewart Connector SS-6488S-A-PG4-BA is the direct substitute for the obsolete Amphenol ICC 94910-101AMLF based on the following engineering criteria:

Product Status: The Stewart Connector part maintains Active status, ensuring ongoing availability and supply chain support, whereas the Amphenol ICC part is Obsolete.

Compliance & Certifications: Both parts are RoHS compliant. The Stewart Connector achieves ROHS3 compliance, meeting current regulatory requirements. Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Functional Equivalence: All critical parameters—connector type, contact configuration, mounting method, orientation, termination type, shielding design, and board lock feature—are identical between the two parts.

Environmental Performance: The Stewart Connector operates across a wider temperature range (-40°C ~ 85°C versus -40°C ~ 70°C), providing enhanced thermal margin for demanding applications.

Contact Durability: The Stewart Connector features increased gold plating thickness (30.0µin versus 15.0µin), enhancing contact longevity and wear resistance.

Frequently Asked Questions (FAQ)

Q: Can the Stewart Connector SS-6488S-A-PG4-BA be used as a direct replacement for the Amphenol ICC 94910-101AMLF?

A: Yes. Both connectors share identical connector type, contact configuration (8p8c RJ45), mounting method (through-hole), orientation (90° right-angle), termination (solder), shielding design (EMI finger), and board lock feature. The Stewart Connector is functionally equivalent and maintains all required electrical and mechanical interfaces.

Q: What are the differences between these two parts?

A: The primary differences are: (1) Contact material composition (Phosphor Bronze versus Copper Alloy); (2) Contact finish thickness (15.0µin versus 30.0µin gold plating); (3) Housing material (Glass-filled Thermoplastic versus standard Thermoplastic); (4) Operating temperature range (70°C maximum versus 85°C maximum); (5) Product status (Obsolete versus Active). These differences do not affect functional substitution for standard RJ45 applications.

Q: Are there packaging differences between these parts?

A: The Amphenol ICC part packaging is not specified in available data. The Stewart Connector is supplied in Tray packaging. Confirm packaging requirements with your procurement or assembly process specifications.

Q: Do both parts meet current regulatory compliance?

A: Yes. Both parts are RoHS compliant. The Stewart Connector additionally meets ROHS3 requirements. Both carry identical ECCN and HTSUS classifications for export and tariff purposes.

Q: Which part should be selected for new designs?

A: The Stewart Connector SS-6488S-A-PG4-BA should be selected for new designs due to its Active product status, enhanced contact plating, wider operating temperature range, and current regulatory compliance posture.