Amphenol ICC 94910-001AM Modular Connector RJ45 Jack — Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 94910-001AM is a shielded modular jack connector (8p8c RJ45) with 90° right-angle orientation, designed for through-hole PCB mounting with solder termination. This connector features an EMI finger for shielding and board lock mechanism, rated for Cat3 Ethernet applications. The part is currently obsolete, necessitating identification of functionally equivalent alternatives from active product lines that maintain electrical and mechanical compatibility for direct board-level substitution.

Substiute Parts

94910-001AM

Amphenol ICC (FCI)In Stock: 96594910-001AM Datasheet

Current PartRFQ

94910-001AMLF

Amphenol ICC (FCI)In Stock: 107894910-001AMLF Datasheet

DirectRFQ

SI-60085-F

Stewart ConnectorIn Stock: 1188SI-60085-F Datasheet

MFR RecommendedRFQ

SS-6488S-A-NF-K1

Stewart ConnectorIn Stock: 806SS-6488S-A-NF-K1 Datasheet

MFR RecommendedRFQ

SS-6488S-A-NF-SB02

Stewart ConnectorIn Stock: 827SS-6488S-A-NF-SB02 Datasheet

MFR RecommendedRFQ

SS-6488S-A-PG1-BA

Stewart ConnectorIn Stock: 1215SS-6488S-A-PG1-BA Datasheet

MFR RecommendedRFQ

SS-7188S-A-NF-1

Stewart ConnectorIn Stock: 709SS-7188S-A-NF-1 Datasheet

MFR RecommendedRFQ

SS-7188S-A-NF-K1

Stewart ConnectorIn Stock: 1144SS-7188S-A-NF-K1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 94910-001AM is determined by strict alignment with the following core parameters:

Critical Compatibility Parameters:

• Connector type: 8p8c (RJ45) jack configuration
• Mounting method: Through-hole solder termination
• Physical orientation: 90° right-angle
• Port configuration: Single port, single row
• Shielding requirement: Shielded construction with EMI finger
• Tab orientation: Down-facing tab direction
• Mechanical feature: Board lock mechanism

Acceptable Variation Parameters:

• Contact material (Phosphor Bronze or Copper Alloy acceptable)
• Contact finish thickness (within gold plating specification)
• Housing material (Thermoplastic variants acceptable)
• Operating temperature range (must encompass or exceed -40°C to 70°C minimum)
• Category rating (Cat3, Cat5e acceptable for backward compatibility)

Non-Substitutable Parameters:

• Connector type (must remain 8p8c RJ45 jack)
• Mounting type (must remain through-hole)
• Termination method (must remain solder)
• Orientation (must remain 90° right-angle)

Substitute parts are grouped by manufacturer and product series. Direct Amphenol ICC substitutes maintain identical electrical specifications with updated RoHS compliance. Stewart Connector alternatives provide equivalent mechanical and electrical performance with enhanced compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute — Amphenol ICC 94910-001AMLF: The 94910-001AMLF is the direct Amphenol ICC equivalent, maintaining identical electrical and mechanical specifications to the obsolete 94910-001AM. This part is active in production with RoHS compliance certification, making it the preferred substitution for existing designs. Packaging is supplied in tube format. No design modifications are required for board-level integration.

Secondary Substitutes — Stewart Connector SS-6488S Series: The SS-6488S-A-NF-K1, SS-6488S-A-NF-SB02, and SS-6488S-A-PG1-BA variants provide equivalent 8p8c RJ45 shielded jack functionality with through-hole solder termination and 90° right-angle orientation. All three are active products with ROHS3 compliance. The SS-6488S-A-PG1-BA includes EMI finger shielding, matching the original part's EMI specification. Operating temperature range extends to 85°C, exceeding the original specification. Contact finish thickness varies (30.0µin to 50.0µin), all within acceptable gold plating parameters.

Tertiary Substitutes — Stewart Connector SS-7188S Series: The SS-7188S-A-NF-1 and SS-7188S-A-NF-K1 are Cat5e-rated alternatives providing enhanced category performance over the original Cat3 specification. Both maintain identical mechanical compatibility and through-hole solder termination. The SS-7188S-A-NF-K1 includes keyed features. These parts are active with ROHS3 compliance and extended operating temperature to 85°C.

Compliance Consideration: All substitute parts are ROHS3 compliant or RoHS compliant, addressing the non-compliance status of the obsolete 94910-001AM. Selection should prioritize compliance requirements of the target application and regulatory jurisdiction.

Frequently Asked Questions (FAQ)

Q: Can the 94910-001AMLF directly replace the 94910-001AM without PCB modifications? A: Yes. The 94910-001AMLF is the direct Amphenol ICC substitute with identical pinout, mechanical envelope, and electrical specifications. No PCB layout changes are required.

Q: What is the difference between the Stewart Connector SS-6488S and SS-7188S series? A: The primary difference is category rating. The SS-6488S series is unrated for category performance, while the SS-7188S series is Cat5e-rated. Both provide equivalent mechanical compatibility and shielding. The SS-7188S series supports higher bandwidth applications.

Q: Are the Stewart Connector alternatives mechanically compatible with the original Amphenol ICC footprint? A: Yes. All substitute parts maintain identical through-hole mounting configuration, 90° right-angle orientation, down-facing tab direction, and board lock mechanism. Physical envelope compatibility is maintained across all listed substitutes.

Q: Does the variation in contact finish thickness affect electrical performance? A: No. Contact finish thickness variations (5.00µin to 50.0µin) are within acceptable gold plating specifications for RJ45 connectors. All finishes provide equivalent electrical conductivity and contact resistance characteristics.

Q: Can I use the SS-7188S-A-NF-K1 (Cat5e) in place of the Cat3-rated original part? A: Yes. Cat5e rating is backward compatible with Cat3 applications. The SS-7188S-A-NF-K1 provides enhanced performance margin and is suitable for Cat3 legacy designs.

Q: What does the "Keyed" feature in SS-6488S-A-NF-K1 and SS-7188S-A-NF-K1 mean? A: Keying provides mechanical polarization to prevent incorrect connector mating orientation. This is an additional feature that does not affect compatibility with standard RJ45 plugs in non-keyed applications.

Q: Does the SS-6488S-A-NF-SB02 "Shorting" feature affect compatibility? A: The shorting feature provides internal contact bridging for specific signaling applications. This does not affect standard Ethernet pin compatibility but may introduce unintended behavior in standard applications. Verify application requirements before selection.

Q: Are all substitute parts available in the same packaging as the original? A: Packaging varies. The 94910-001AMLF is supplied in tube format. Stewart Connector parts have packaging specifications listed as either tube or unspecified. Verify packaging requirements with supplier documentation.

Q: What is the inventory status of these substitute parts? A: All listed substitutes are active products with confirmed inventory availability ranging from 682 to 1144 pieces in stock, ensuring supply chain continuity.