3M 94783 Equivalent & Substitute Parts

Part Overview

The 3M 94783 is an insulated spade terminal connector designed for crimp termination of 10-12 AWG wire. This yellow 8 stud terminal is part of the Highland™ series and is classified as Active product status. The connector features a tin-plated copper contact with vinyl insulation and butted seam construction. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and functional compatibility within the spade terminal connector category.

Substiute Parts

94783

3MIn Stock: 87794783 Datasheet

Current PartRFQ

PV10-8F-L

Panduit CorpIn Stock: 1445PV10-8F-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3M 94783 is determined by the following critical parameters:

• Wire gauge compatibility (10-12 AWG)
• Stud size (8 stud configuration)
• Crimp termination method
• Insulated vinyl construction
• Tin-plated copper contact material
• Yellow color designation
• Free hanging mounting configuration

The Panduit Corp PV10-8F-L meets these core electrical and mechanical requirements, establishing it as a valid substitute. Both parts share identical wire gauge, stud size, termination method, insulation material, contact material, contact finish, color, and mounting type. Dimensional variations in outer width, overall length, and insulation diameter fall within acceptable tolerances for functional interchangeability in standard spade terminal applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 94783 and Panduit PV10-8F-L are Active product status components with full regulatory compliance. The 3M 94783 carries RoHS Compliant certification, while the Panduit PV10-8F-L meets ROHS3 Compliant standards. Both parts are REACH Unaffected and classified under ECCN EAR99. Selection between these parts should be based on availability, lead time, and existing supply chain integration, as both meet identical functional and compliance requirements for 10-12 AWG spade terminal applications.

Frequently Asked Questions (FAQ)

Q: Can the Panduit PV10-8F-L directly replace the 3M 94783 in existing assemblies?

A: Yes. Both parts meet identical wire gauge (10-12 AWG), stud size (8 stud), termination method (crimp), insulation type (vinyl), contact material (copper with tin finish), and mounting configuration (free hanging in-line) specifications. Dimensional variations are within acceptable tolerances for standard spade terminal connector applications.

Q: What are the key differences between these two parts?

A: The primary differences are dimensional: the Panduit part has a slightly narrower outer width (0.370" vs 0.380") and smaller insulation diameter (0.225" vs 0.250"). The 3M part features butted seam construction while the Panduit part uses brazed seam construction. Both construction methods are acceptable for this application category.

Q: Are both parts RoHS compliant?

A: Yes. The 3M 94783 is RoHS Compliant, and the Panduit PV10-8F-L is ROHS3 Compliant. Both meet regulatory requirements for restricted substance limitations.

Q: What wire gauges are compatible with these terminals?

A: Both terminals are rated for 10-12 AWG wire. This specification is fixed and cannot be altered through substitution.

Q: Can these terminals be used in high-temperature applications?

A: Temperature ratings are not provided in the technical specifications. Consult manufacturer datasheets for thermal performance data if high-temperature operation is required.

Q: What is the significance of the 8 stud designation?

A: The 8 stud size refers to the diameter of the terminal's ring opening, which accommodates standard #8 fasteners. This dimension is critical for mechanical compatibility and cannot be substituted with different stud sizes.