3M 94776 Equivalent & Substitute Parts

Part Overview

The 3M 94776 is an insulated spade terminal connector designed for crimp termination of 14-16 AWG wire onto an 8 stud. This blue polyamide-insulated terminal features a butted seam construction and tin-plated copper contact material. The part is Active status and RoHS Compliant, making it suitable for applications requiring reliable electrical connections in industrial and automotive environments. Equivalent parts may be required due to supply constraints, regional availability, or specific design requirements within compatible electrical specifications.

Substiute Parts

94776

3MIn Stock: 105994776 Datasheet

Current PartRFQ

PNF14-8F-C

Panduit CorpIn Stock: 1005PNF14-8F-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Panduit Corp PNF14-8F-C qualifies as a direct substitute based on the following critical parameters:

• Wire gauge compatibility: Both parts accept 14-16 AWG wire
• Stud size match: Both feature 8 stud configuration
• Termination method: Both use crimp termination
• Insulation material: Both use Polyamide (PA), Nylon
• Contact material: Both use copper with tin plating
• Color specification: Both are blue
• Mounting type: Both are free hanging (in-line)
• Regulatory compliance: Both are RoHS Compliant and REACH Unaffected

Dimensional variations exist between the two parts (overall length, width, and insulation diameter), but these fall within acceptable tolerances for spade terminal applications where the primary functional requirements are wire gauge acceptance and stud size compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 94776 and Panduit PNF14-8F-C meet the core functional requirements for 14-16 AWG spade terminal applications with 8 stud connections. Selection between these parts should be based on:

• Product availability and lead time requirements
• Existing inventory and supply chain preferences
• Compliance certifications: The Panduit part carries ROHS3 Compliant status, representing a more recent RoHS revision level compared to the 3M part's RoHS Compliant designation
• Both parts maintain REACH Unaffected status and EAR99 export classification
• Dimensional fit within the specific application enclosure or connector housing

The Panduit PNF14-8F-C features a brazed seam and serrated termination, which may provide enhanced mechanical retention compared to the 3M part's butted seam design, depending on application requirements.

Frequently Asked Questions (FAQ)

Q: Can the Panduit PNF14-8F-C directly replace the 3M 94776 in existing assemblies?

A: Yes, provided the application accommodates the dimensional differences. Both parts accept 14-16 AWG wire and mount to 8 studs using crimp termination. Verify that the slightly smaller overall length (0.850" vs 0.910") and width (0.310" vs 0.340") do not conflict with your specific connector housing or mounting constraints.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS Compliant and REACH Unaffected. The Panduit part carries ROHS3 Compliant certification, which represents compliance with the most recent RoHS directive revision. Both maintain EAR99 export classification.

Q: What is the difference between butted seam and brazed seam construction?

A: The 3M 94776 uses butted seam construction, while the Panduit PNF14-8F-C uses brazed seam construction. Brazed seams typically provide stronger mechanical joints. Selection depends on your application's vibration resistance and mechanical stress requirements.

Q: Do these parts require different crimping tools?

A: Both parts use standard crimp termination for 14-16 AWG wire. Verify that your crimping tool is rated for the specific wire gauge and stud size (8 stud). Tool compatibility should be confirmed with the tool manufacturer's specifications.

Q: What is the significance of the serrated termination on the Panduit part?

A: The serrated termination on the Panduit PNF14-8F-C provides enhanced grip and retention of the wire during the crimp process, potentially improving connection reliability under vibration or thermal cycling conditions.

Q: Are bulk packaging quantities the same for both parts?

A: Both parts are supplied in bulk packaging. Current inventory shows 1013 pcs for the 3M 94776 and 948 pcs for the Panduit PNF14-8F-C. Confirm specific packaging quantities and minimum order requirements with your supplier.