Ohmite 93J6K2 Equivalent & Substitute Parts

Part Overview

The Ohmite 93J6K2 is a 6.2 kOhms ±5% 3.25W through-hole resistor with axial leads, featuring wirewound construction and flame retardant coating with safety characteristics. This component is classified as Active product status with 1135 units in current inventory. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring this specific resistance value and power rating.

Substiute Parts

93J6K2

OhmiteIn Stock: 120093J6K2 Datasheet

Current PartRFQ

93J6K2E

OhmiteIn Stock: 100793J6K2E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 93J6K2 are identified based on strict parametric equivalence. The following criteria determine substitutability:

• Resistance value: 6.2 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 3.25W (exact match required)
• Composition: Wirewound (exact match required)
• Package type: Axial (exact match required)
• Physical dimensions: 0.233" Dia x 0.579" L (exact match required)
• Temperature coefficient: ±30ppm/°C (exact match required)
• Features: Flame retardant coating and safety characteristics (exact match required)
• Number of terminations: 2 (exact match required)

The Ohmite 93J6K2E meets all parametric requirements for direct substitution with the main part number 93J6K2.

Parameter Comparison

Engineering Selection Recommendations

Both the Ohmite 93J6K2 and 93J6K2E are Active product status components with identical electrical and mechanical specifications. The primary distinction between these parts is regulatory compliance status. The 93J6K2E is ROHS3 compliant, while the 93J6K2 is RoHS non-compliant. Selection between these parts should be based on application regulatory requirements and end-use market compliance obligations. Both parts are manufactured by Ohmite within the same 90 series and maintain equivalent performance characteristics for circuit applications requiring 6.2 kOhms at 3.25W with ±5% tolerance.

Frequently Asked Questions (FAQ)

Q: Can the 93J6K2E be used as a direct replacement for the 93J6K2?

A: Yes. The 93J6K2E is a parametric equivalent with identical resistance, tolerance, power rating, composition, package type, physical dimensions, and temperature coefficient. Both parts are manufactured by Ohmite within the same 90 series.

Q: What is the difference between the 93J6K2 and 93J6K2E?

A: The primary differences are packaging format (standard vs. bulk) and regulatory compliance. The 93J6K2E is ROHS3 compliant with MSL rating of 1 (Unlimited), while the 93J6K2 is RoHS non-compliant with MSL listed as Not Applicable.

Q: Are the physical dimensions identical between substitute parts?

A: Yes. Both the 93J6K2 and 93J6K2E share identical axial package dimensions of 0.233" diameter by 0.579" length (5.90mm x 14.70mm), ensuring mechanical compatibility in PCB layouts and through-hole applications.

Q: Which part should be selected for RoHS-regulated applications?

A: The 93J6K2E is ROHS3 compliant and is the appropriate selection for applications subject to RoHS directives and regulatory requirements.

Q: Are both parts suitable for high-temperature environments?

A: Both parts maintain a temperature coefficient of ±30ppm/°C and are rated for wirewound resistor applications. Operating temperature specifications should be verified against specific application requirements.