Ohmite 93J360 Equivalent & Substitute Parts

Part Overview

The Ohmite 93J360 is a 360 Ohm, 3.25W wirewound axial resistor with ±5% tolerance and flame retardant coating. This component is designed for through-hole applications requiring reliable power dissipation and safety features. The part is currently active in production with 899 units in stock. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

93J360

OhmiteIn Stock: 96993J360 Datasheet

Current PartRFQ

93J360E

OhmiteIn Stock: 119893J360E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 93J360 are qualified based on the following critical parameters:

• Resistance Value: 360 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power Rating: 3.25W (exact match required)
• Composition: Wirewound (exact match required)
• Package Type: Axial (exact match required)
• Temperature Coefficient: ±30ppm/°C (exact match required)
• Physical Dimensions: 0.233" Dia x 0.579" L (exact match required)
• Safety Features: Flame Retardant Coating, Safety (exact match required)

The 93J360E qualifies as a parametric equivalent because it maintains identical electrical specifications and mechanical form factor. Packaging differences (Bulk vs. standard) do not affect functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 93J360 and 93J360E are active production parts from Ohmite with identical electrical and mechanical specifications. Selection between these parts should be based on regulatory compliance requirements:

• 93J360: Use when RoHS non-compliance is acceptable for the application.
• 93J360E: Use when ROHS3 compliance is required. This variant offers improved regulatory alignment while maintaining all electrical and mechanical performance characteristics.

Both parts are suitable for direct substitution in through-hole circuit designs requiring 360 Ohm, 3.25W wirewound resistors with flame retardant safety features.

Frequently Asked Questions (FAQ)

Q: Can the 93J360E replace the 93J360 in existing designs?

A: Yes. The 93J360E is electrically and mechanically identical to the 93J360. Both parts have the same resistance value, tolerance, power rating, temperature coefficient, and physical dimensions. Direct substitution is possible without circuit modification.

Q: What is the difference between the 93J360 and 93J360E?

A: The primary differences are RoHS compliance status and packaging format. The 93J360E is ROHS3 compliant, while the 93J360 is RoHS non-compliant. The 93J360E is supplied in Bulk packaging, whereas the 93J360 uses standard packaging. Electrical performance is identical.

Q: Are there any thermal or performance differences between these parts?

A: No. Both parts have identical temperature coefficients (±30ppm/°C), power ratings (3.25W), and thermal characteristics. They perform identically in circuit applications.

Q: Which part should I select for new designs?

A: For new designs, the 93J360E is recommended due to ROHS3 compliance, which aligns with current regulatory standards and environmental requirements. Both parts are active and available.

Q: Do these parts require any special handling or storage considerations?

A: The 93J360E has a Moisture Sensitivity Level of 1 (Unlimited), indicating no special moisture control requirements during storage or handling. Standard component storage practices are sufficient.