SA500PS1HD Pressure Sensor - Equivalent & Substitute Parts

Part Overview

The SA500PS1HD is a stainless steel pressure sensor manufactured by Honeywell Sensing and Productivity Solutions. This component is classified as obsolete, indicating it is no longer in active production. The sensor operates as a pressure measurement device suitable for applications requiring stainless construction and sealed gauge pressure measurement. Due to its obsolete status, identification of functionally equivalent substitute components is necessary for system maintenance, repair, and new design implementations where this sensor specification is required.

Substiute Parts

9305808

Honeywell Sensing and Productivity SolutionsIn Stock: 8379305808 Datasheet

Current PartRFQ

MLH500PSP06C

Honeywell Sensing and Productivity SolutionsIn Stock: 948MLH500PSP06C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the SA500PS1HD are identified based on manufacturer alignment, regulatory compliance, and functional pressure measurement capability. The primary substitute identified is the MLH500PSP06C, also manufactured by Honeywell Sensing and Productivity Solutions. This substitution is valid based on the following criteria:

Key Substitution Parameters:

• Manufacturer: Identical (Honeywell Sensing and Productivity Solutions)
• RoHS Compliance: Matching (RoHS Compliant)
• Moisture Sensitivity Level: Matching (MSL 1 - Unlimited)
• ECCN Classification: Matching (EAR99)
• HTSUS Code: Matching (9026.20.4000)
• Product Category: Both classified as pressure sensors/transducers
• Pressure Measurement Capability: 500 PSI operating range

The MLH500PSP06C represents a functionally equivalent alternative with documented pressure measurement specifications at the 500 PSI operating point, matching the core pressure range indicated by the SA500PS1HD designation.

Parameter Comparison

Engineering Selection Recommendations

Both the SA500PS1HD and MLH500PSP06C are obsolete products manufactured by Honeywell Sensing and Productivity Solutions. Selection between these components should be based on the following engineering considerations:

Regulatory Compliance: Both components maintain RoHS Compliance status and share identical ECCN (EAR99) and HTSUS (9026.20.4000) classifications, ensuring equivalent regulatory standing for procurement and deployment.

Moisture Sensitivity: Both components carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints during storage or handling.

Manufacturer Continuity: Both components originate from the same manufacturer, ensuring design philosophy and quality standards alignment within the Honeywell Sensing and Productivity Solutions product line.

Obsolescence Status: Given that both components are obsolete, long-term availability through standard distribution channels is limited. Component selection should prioritize current inventory availability and consider evaluation of active production alternatives from Honeywell or equivalent manufacturers for new designs.

Frequently Asked Questions (FAQ)

Q: Can the MLH500PSP06C directly replace the SA500PS1HD in existing applications?

A: Both components are manufactured by Honeywell Sensing and Productivity Solutions and share identical regulatory compliance profiles (RoHS, ECCN, HTSUS). However, direct replacement requires verification of mechanical interface compatibility, including port size, termination style, and mounting configuration. The MLH500PSP06C features a Male 1/8" NPT threaded port with flying lead termination, which must be confirmed compatible with the original SA500PS1HD installation.

Q: What is the significance of the MSL 1 rating for both components?

A: MSL 1 (Moisture Sensitivity Level 1 - Unlimited) indicates that both components have no moisture sensitivity constraints. These components do not require special moisture control during storage, handling, or installation, simplifying logistics and deployment procedures.

Q: Why are both components classified as obsolete?

A: Obsolete status indicates that both the SA500PS1HD and MLH500PSP06C are no longer in active production by Honeywell Sensing and Productivity Solutions. This classification reflects product lifecycle discontinuation and necessitates sourcing from existing inventory channels or identification of active production alternatives.

Q: Are there regulatory restrictions on procurement or use of these components?

A: Both components carry ECCN EAR99 classification, which is the most permissive export control category. No additional export licensing is required for standard commercial applications. HTSUS code 9026.20.4000 applies standard tariff treatment for measuring and checking instruments.

Q: What packaging considerations apply to these pressure sensors?

A: Both components are supplied in cylinder metal package configuration. The MLH500PSP06C utilizes flying lead termination, requiring appropriate connector or solder termination during installation. Packaging specifications should be confirmed with the supplier prior to procurement.