Ohmite 92J700 Equivalent & Substitute Parts

Part Overview

The Ohmite 92J700 is a 700 Ohm, 2.25W wirewound axial resistor with ±5% tolerance, designed for through-hole applications requiring flame retardant coating and safety features. This component is classified as Active product status with 1042 units currently in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, supply chain considerations, or specific compliance requirements.

Substiute Parts

92J700

OhmiteIn Stock: 106192J700 Datasheet

Current PartRFQ

92J700E

OhmiteIn Stock: 112992J700E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The Ohmite 92J700E qualifies as a parametric equivalent substitute based on identical electrical specifications: 700 Ohms resistance, ±5% tolerance, 2.25W power rating, wirewound composition, and ±30ppm/°C temperature coefficient. Both parts share the same axial package configuration with identical physical dimensions (0.220" Dia x 0.406" L). The primary distinction between the main part and substitute lies in packaging format (Bulk for 92J700E versus standard for 92J700) and RoHS compliance status. The substitute part 92J700E is ROHS3 compliant with MSL rating of 1 (Unlimited), whereas the main part 92J700 is RoHS non-compliant with MSL not applicable.

Parameter Comparison

Engineering Selection Recommendations

Both the 92J700 and 92J700E are Active status components manufactured by Ohmite with identical electrical and mechanical specifications. Selection between these parts is determined by regulatory and compliance requirements. The 92J700E substitute is suitable for applications requiring ROHS3 compliance and defined moisture sensitivity specifications. The 92J700 main part is appropriate for applications without RoHS compliance mandates. Both parts are functionally interchangeable in through-hole circuit designs requiring 700 Ohm, 2.25W wirewound resistors with axial configuration and flame retardant safety features.

Frequently Asked Questions (FAQ)

Q: Are the 92J700 and 92J700E electrically identical? A: Yes. Both parts have identical resistance (700 Ohms), tolerance (±5%), power rating (2.25W), temperature coefficient (±30ppm/°C), and composition (wirewound).

Q: Can these parts be used interchangeably in PCB designs? A: Yes. Both parts share identical axial package configuration and physical dimensions (0.220" Dia x 0.406" L), allowing direct substitution in through-hole layouts without design modification.

Q: What is the primary difference between these parts? A: The 92J700E is ROHS3 compliant with MSL rating 1 (Unlimited), while the 92J700 is RoHS non-compliant with MSL not applicable. Packaging format also differs (Bulk for 92J700E).

Q: Which part should be selected for new designs? A: Selection depends on regulatory requirements. For applications requiring RoHS compliance, specify 92J700E. For applications without RoHS mandates, either part is acceptable based on availability.

Q: Are there any mechanical compatibility concerns? A: No. Both parts have identical physical dimensions and termination configuration, ensuring mechanical compatibility in all through-hole applications.