Ohmite 92J430 430 Ohm 2.25W Axial Wirewound Resistor - Equivalent & Substitute Parts

Part Overview

The Ohmite 92J430 is a 430 Ohm, 2.25W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is designed for applications requiring precision resistance in a compact axial package with enhanced thermal and safety characteristics. The part maintains Active product status with 894 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part number becomes unavailable or when alternative packaging or compliance requirements are needed.

Substiute Parts

92J430

OhmiteIn Stock: 92692J430 Datasheet

Current PartRFQ

92J430E

OhmiteIn Stock: 114892J430E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Ohmite 92J430 is determined by strict equivalence across the following critical parameters:

• Resistance value: 430 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 2.25W (exact match required)
• Composition: Wirewound (exact match required)
• Package type: Axial (exact match required)
• Physical dimensions: 0.220" Dia x 0.406" L (exact match required)
• Temperature coefficient: ±30ppm/°C (exact match required)
• Features: Flame retardant coating and safety characteristics (exact match required)

The identified substitute part 92J430E meets all electrical and mechanical parameters required for direct substitution. Differences in packaging format (Bulk vs. standard), RoHS compliance status, and inventory levels do not affect functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The 92J430E serves as a direct parametric equivalent to the 92J430. Both parts are manufactured by Ohmite, maintain Active product status, and are electrically and mechanically identical across all functional specifications.

Selection between these parts should be based on compliance requirements and packaging needs:

• 92J430: Select when RoHS non-compliant components are acceptable for the application and standard packaging is required.
• 92J430E: Select when ROHS3 compliance is mandated by design specifications, procurement standards, or regulatory requirements. This variant also offers higher inventory availability (1130 units vs. 894 units).

Both parts are suitable for identical circuit applications without design modification or re-qualification.

Frequently Asked Questions (FAQ)

Q: Can the 92J430E be used as a direct replacement for the 92J430 in existing designs?

A: Yes. The 92J430E is a parametric equivalent with identical electrical and mechanical specifications. No circuit redesign or component re-qualification is required. The primary difference is RoHS3 compliance status in the 92J430E variant.

Q: What is the difference between the 92J430 and 92J430E?

A: The parts are electrically and mechanically identical. The 92J430E is ROHS3 compliant, while the 92J430 is RoHS non-compliant. Packaging format differs (Bulk vs. standard), and inventory levels vary. All functional parameters—resistance, tolerance, power rating, temperature coefficient, and physical dimensions—are identical.

Q: Are there any thermal or performance differences between these parts?

A: No. Both parts share identical temperature coefficient (±30ppm/°C), power rating (2.25W), and thermal characteristics. Performance in circuit applications is equivalent.

Q: Which part should be selected for new designs?

A: The 92J430E is recommended for new designs due to ROHS3 compliance, which aligns with current regulatory standards and procurement practices. The 92J430 remains suitable for applications where RoHS compliance is not a requirement.

Q: Are both parts available in the same package format?

A: Both parts use the identical Axial package with dimensions 0.220" Dia x 0.406" L (5.60mm x 10.30mm). Packaging format (Bulk vs. standard) does not affect physical compatibility or circuit performance.