92J360E Equivalent & Substitute Parts Reference

Part Overview

The 92J360E is a 360 Ohm, 2.25W wirewound axial resistor manufactured by Ohmite, part of the 90 series. This through-hole component features flame retardant coating and safety construction, designed for applications requiring reliable power dissipation in compact form factors. The part is currently active in production with 830 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

92J360E

OhmiteIn Stock: 91992J360E Datasheet

Current PartRFQ

92J360

OhmiteIn Stock: 119492J360 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 92J360E is determined by matching the following critical parameters:

• Resistance value: 360 Ohms
• Tolerance: ±5%
• Power rating: 2.25W
• Composition: Wirewound
• Package: Axial
• Temperature coefficient: ±30ppm/°C
• Physical dimensions: 0.220" Dia x 0.406" L
• Termination count: 2
• Features: Flame retardant coating and safety construction

The 92J360 meets all parametric requirements for direct substitution with the 92J360E. Both parts are manufactured by Ohmite within the 90 series and share identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 92J360E and 92J360 are active production parts from Ohmite's 90 series with identical electrical and mechanical specifications. The primary distinction is regulatory compliance: the 92J360E carries ROHS3 certification, while the 92J360 is RoHS non-compliant. Selection between these parts should be based on application requirements and regulatory constraints. The 92J360 offers higher inventory availability at 1100 units compared to 830 units for the 92J360E. Both parts are suitable for through-hole PCB assembly with axial lead configuration and identical thermal performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the 92J360 replace the 92J360E in all applications?

A: The 92J360 is parametrically equivalent to the 92J360E in all electrical and mechanical specifications. However, the 92J360E is ROHS3 compliant while the 92J360 is not. Selection depends on whether RoHS compliance is required for your application or end market.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both the 92J360E and 92J360 share identical dimensions of 0.220" diameter by 0.406" length (5.60mm x 10.30mm), ensuring compatibility with existing PCB layouts and through-hole mounting patterns.

Q: What is the temperature coefficient significance for these resistors?

A: The ±30ppm/°C temperature coefficient indicates the resistor's resistance change per degree Celsius. Both parts have identical temperature stability, making them interchangeable for applications with temperature-dependent performance requirements.

Q: Are both parts available in the same packaging format?

A: Yes. Both the 92J360E and 92J360 are supplied in bulk packaging as axial through-hole components with identical lead configuration and termination specifications.

Q: Which part should I select for new designs?

A: For new designs, the 92J360E is recommended due to ROHS3 compliance, which aligns with current environmental and regulatory standards. The 92J360 remains available for legacy applications or where RoHS compliance is not a requirement.