Equivalent & Substitute Parts for Ohmite 92J2R0

Part Overview

The Ohmite 92J2R0 is a 2 Ohm, 5% tolerance, 2.25W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is currently in stock with 1105 units available. The 92J2R0 is part of the Ohmite 90 series and is designed for applications requiring reliable power dissipation in compact axial form factors. Alternative models may be required due to RoHS compliance requirements, packaging preferences, or inventory availability.

Substiute Parts

92J2R0

OhmiteIn Stock: 115992J2R0 Datasheet

Current PartRFQ

92J2R0E

OhmiteIn Stock: 121092J2R0E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 92J2R0 is determined by strict equivalence across the following critical parameters:

• Resistance value: 2 Ohms
• Tolerance: ±5%
• Power rating: 2.25W
• Composition: Wirewound
• Package type: Axial
• Temperature coefficient: ±100ppm/°C
• Features: Flame retardant coating and safety characteristics
• Physical dimensions: 0.220" Dia x 0.406" L (5.60mm x 10.30mm)
• Termination count: 2

The 92J2R0E meets all electrical and mechanical parameters required for direct substitution. The primary distinction between these parts is packaging format and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

The 92J2R0E provides full parametric equivalence to the 92J2R0 across all electrical and mechanical specifications. Selection between these parts should be based on the following criteria:

92J2R0: Select this part when RoHS non-compliant components are acceptable for the application and standard packaging is preferred.

92J2R0E: Select this part when ROHS3 compliance is required by design specifications or regulatory requirements. This variant is supplied in bulk packaging format and maintains identical electrical performance and physical dimensions.

Both parts are Active status components from the Ohmite 90 series with equivalent inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the 92J2R0E be used as a direct replacement for the 92J2R0?

A: Yes. The 92J2R0E is a parametric equivalent with identical resistance, tolerance, power rating, composition, temperature coefficient, and physical dimensions. The primary difference is RoHS3 compliance status and bulk packaging format.

Q: What is the difference between standard and bulk packaging?

A: Standard packaging refers to the original packaging format, while bulk packaging indicates the parts are supplied in bulk quantities. Both formats contain the same component with identical electrical and mechanical specifications.

Q: Are there any dimensional differences between these parts?

A: No. Both the 92J2R0 and 92J2R0E share identical physical dimensions of 0.220" Dia x 0.406" L (5.60mm x 10.30mm) and are both axial package types.

Q: Which part should I select for new designs?

A: Selection depends on RoHS compliance requirements. If ROHS3 compliance is mandated, use the 92J2R0E. If RoHS compliance is not a requirement, either part is suitable based on availability and packaging preference.

Q: Do these parts have the same temperature coefficient?

A: Yes. Both parts have a temperature coefficient of ±100ppm/°C, ensuring equivalent thermal performance across operating conditions.