Ohmite 92J150 Equivalent & Substitute Parts

Part Overview

The Ohmite 92J150 is a 150 Ohm, ±5% tolerance, 2.25W axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is designed for through-hole applications requiring reliable power dissipation in industrial and safety-critical circuits. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained within the specified tolerances, ensuring direct functional replacement without circuit redesign.

Substiute Parts

92J150

OhmiteIn Stock: 69792J150 Datasheet

Current PartRFQ

92J150E

OhmiteIn Stock: 106092J150E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 92J150 are qualified based on strict equivalence of the following parameters:

• Resistance value: 150 Ohms
• Tolerance: ±5%
• Power rating: 2.25W
• Composition: Wirewound
• Package configuration: Axial
• Temperature coefficient: ±30ppm/°C
• Physical dimensions: 0.220" Dia x 0.406" L (5.60mm x 10.30mm)
• Termination count: 2
• Safety features: Flame retardant coating

The Ohmite 92J150E qualifies as a parametric equivalent substitute, maintaining all critical electrical and mechanical specifications while differing in packaging format and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the Ohmite 92J150 and 92J150E are Active status components suitable for direct substitution based on electrical and mechanical parameter equivalence. The primary distinction between these parts is regulatory compliance: the 92J150E achieves ROHS3 compliance, whereas the 92J150 is RoHS non-compliant. Selection between these parts should be determined by application regulatory requirements. The 92J150E is packaged in bulk format, while the 92J150 uses standard packaging. Both components maintain identical electrical performance characteristics and physical dimensions, ensuring functional interchangeability in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can the 92J150E directly replace the 92J150 in existing designs?

A: Yes. The 92J150E maintains identical electrical specifications (150 Ohms, ±5%, 2.25W) and physical dimensions (0.220" Dia x 0.406" L). Both are wirewound axial resistors with flame retardant coating and safety features. Direct substitution is electrically and mechanically valid.

Q: What is the primary difference between these two part numbers?

A: The 92J150E is ROHS3 compliant, while the 92J150 is RoHS non-compliant. The 92J150E is supplied in bulk packaging format. All electrical and mechanical parameters are equivalent.

Q: Are there any packaging considerations when substituting between these parts?

A: The 92J150 uses standard packaging, while the 92J150E is supplied in bulk format. This affects procurement and handling but does not impact circuit performance or board-level installation.

Q: Do these resistors have different temperature performance characteristics?

A: No. Both parts share an identical temperature coefficient of ±30ppm/°C, ensuring equivalent thermal stability across the operating range.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance, specify the 92J150E. For applications without compliance mandates, either part is functionally equivalent.