Ohmite 92J100E Wirewound Resistor - Equivalent & Substitute Parts

Part Overview

The Ohmite 92J100E is a 100 Ohms ±5% 2.25W through-hole wirewound resistor with axial leads, featuring flame retardant coating and safety construction. This component is designed for applications requiring reliable power dissipation in compact form factors. The part is currently in active production status with 1058 units available in original packaging (Box). Substitute parts are identified when identical electrical and mechanical specifications are required but alternative packaging or compliance configurations are acceptable.

Substiute Parts

92J100E

OhmiteIn Stock: 111992J100E Datasheet

Current PartRFQ

92J100

OhmiteIn Stock: 116192J100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 92J100E is determined by strict equivalence across the following critical parameters:

• Resistance value: 100 Ohms
• Tolerance: ±5%
• Power rating: 2.25W
• Composition: Wirewound
• Package configuration: Axial leads
• Physical dimensions: 0.220" Dia x 0.406" L (5.60mm x 10.30mm)
• Temperature coefficient: ±30ppm/°C
• Termination count: 2

The substitute part 92J100 meets all electrical and mechanical requirements for direct substitution. Differences in packaging format (Box vs. Bulk) and RoHS compliance status do not affect functional compatibility in applications where the component specifications are the controlling requirement.

Parameter Comparison

Engineering Selection Recommendations

Both the 92J100E and 92J100 are active production components from Ohmite's Series 90 wirewound resistor line. Selection between these parts should be based on application-specific compliance requirements:

The 92J100E is specified for applications requiring RoHS compliance certification. This part is supplied in Box packaging format.

The 92J100 is suitable for applications where RoHS compliance is not a controlling requirement. This part is supplied in Bulk packaging format and represents an alternative when packaging configuration and compliance status are acceptable variables.

Both parts are electrically and mechanically identical across all functional parameters. Inventory availability is comparable for both variants.

Frequently Asked Questions (FAQ)

Q: Can the 92J100 be used as a direct replacement for the 92J100E in all applications?

A: The 92J100 is electrically and mechanically equivalent to the 92J100E. Substitution is valid when RoHS compliance is not a design requirement. If RoHS certification is mandatory for your application, the 92J100E must be specified.

Q: What is the difference between Box and Bulk packaging?

A: Box packaging typically includes individual component packaging suitable for controlled inventory and traceability. Bulk packaging is supplied in larger quantities without individual component packaging. Both formats contain identical components.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both the 92J100E and 92J100 share identical axial dimensions of 0.220" Dia x 0.406" L (5.60mm x 10.30mm). PCB layout and mounting considerations are identical.

Q: What does RoHS compliance mean for this component?

A: RoHS (Restriction of Hazardous Substances) compliance indicates the component meets EU directive requirements for restricted substance content. The 92J100E is RoHS compliant; the 92J100 is not. Selection depends on your product's regulatory requirements.

Q: Are the electrical specifications identical?

A: Yes. Both parts are 100 Ohms ±5% 2.25W wirewound resistors with ±30ppm/°C temperature coefficient, flame retardant coating, and safety construction. Electrical performance is identical.