929852-01-22-RB Equivalent & Substitute Parts

Part Overview

The 3M 929852-01-22-RB is a 44-position rectangular receptacle connector with 0.100" (2.54mm) pitch, designed for board-to-board applications with through-hole solder termination. This connector features gold-plated mating contacts and push-pull fastening. The part is currently active in production and widely stocked. Equivalent substitute parts are necessary to address supply chain flexibility, extended lead times, or design revision requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

929852-01-22-RB

3MIn Stock: 786929852-01-22-RB Datasheet

Current PartRFQ

2-534206-2

TE Connectivity AMP ConnectorsIn Stock: 15462-534206-2 Datasheet

MFR RecommendedRFQ

7-534206-2

TE Connectivity AMP ConnectorsIn Stock: 13717-534206-2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 929852-01-22-RB is determined by the following critical parameters:

• Connector Type & Position Count: Must be receptacle with 44 positions
• Pitch & Row Configuration: Must maintain 0.100" (2.54mm) mating pitch and 2-row layout with 0.100" row spacing
• Mounting & Termination: Must support through-hole solder termination
• Fastening & Contact Interface: Must use push-pull fastening with gold-plated mating contacts
• Electrical Performance: Must support minimum 2A current rating and 1500V voltage rating
• Environmental Compliance: Must meet RoHS requirements

The TE Connectivity AMP Connectors parts 2-534206-2 and 7-534206-2 satisfy all substitution criteria. Both are AMPMODU Mod II series receptacles with identical position count, pitch, row spacing, mounting type, termination method, and fastening mechanism. Both feature gold-plated mating contacts and support the required electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both TE Connectivity substitute parts are active production components with full RoHS compliance. The 7-534206-2 carries RoHS Compliant status matching the original 3M part, while the 2-534206-2 carries ROHS3 Compliant status, representing an updated compliance standard. Both parts exceed the original operating temperature range (-65°C ~ 125°C versus -40°C ~ 105°C), providing enhanced thermal margin. Selection between the two TE alternatives should be based on supply availability and compliance documentation requirements for your specific application.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 2-534206-2 and 7-534206-2 be used interchangeably with 929852-01-22-RB?

A: Yes. Both TE parts are direct functional equivalents. They share identical electrical and mechanical specifications for mating pitch, position count, row configuration, current rating, and contact interface. All three parts support 2A current at 1500V and feature gold-plated mating contacts with push-pull fastening.

Q: What are the physical differences between these parts?

A: The insulation height differs slightly: 3M 929852-01-22-RB measures 0.325" (8.25mm), while both TE parts measure 0.320" (8.13mm). Contact post length also varies: 3M at 0.125" (3.18mm) versus TE at 0.115" (2.92mm). These dimensional variations are within acceptable tolerance for board-to-board applications and do not affect electrical compatibility.

Q: Are there compliance differences between the substitute parts?

A: The 7-534206-2 matches the original RoHS Compliant status. The 2-534206-2 carries ROHS3 Compliant status, representing a more recent compliance revision. Both meet current regulatory requirements. The 7-534206-2 also carries UL94 V-0 flammability rating matching the original part.

Q: What is the packaging difference?

A: The 3M part packaging is not specified in available data. Both TE substitute parts are supplied in tube packaging, which is standard for this connector category.

Q: Do the substitute parts support the same temperature range?

A: The TE parts support -65°C ~ 125°C, which exceeds the original 3M specification of -40°C ~ 105°C. This provides additional thermal margin and does not restrict compatibility.