3M 929842-01-07-10 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The 3M 929842-01-07-10 is a 14-position receptacle connector with 0.100" (2.54mm) pitch, designed for through-hole PCB mounting with gold-plated mating contacts. This connector operates across -55°C to 105°C and carries a 2A current rating at 1000V. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

929842-01-07-10

3MIn Stock: 983929842-01-07-10 Datasheet

Current PartRFQ

535598-1

TE Connectivity AMP ConnectorsIn Stock: 980535598-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3M 929842-01-07-10 is determined by strict equivalence across the following critical parameters:

• Connector configuration: 14-position receptacle with 2-row arrangement
• Pitch specification: 0.100" (2.54mm) mating pitch and row spacing
• Electrical performance: 2A current rating and contact finish (gold plating on mating surface)
• Mounting and termination: Through-hole solder termination with push-pull fastening
• Contact geometry: Female socket contacts with square shape

The TE Connectivity AMP Connectors part 535598-1 satisfies all critical substitution criteria. Both connectors maintain identical position count, pitch, mounting method, and electrical current capacity. Both feature gold-plated mating contacts and push-pull fastening mechanisms suitable for board-to-board applications.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 535598-1 is a direct functional substitute for the 3M 929842-01-07-10 based on electrical and mechanical parameter equivalence. The substitute part is in active production status, ensuring long-term availability and supply chain continuity for the obsolete 3M connector.

The substitute connector exceeds the original operating temperature range (-65°C to 125°C versus -55°C to 105°C), providing enhanced thermal performance. Both connectors maintain identical current and voltage ratings with matching contact pitch and row spacing, ensuring mechanical and electrical interchangeability in board-to-board applications.

Both parts carry RoHS non-compliant status and EAR99 export classification. The substitute part carries REACH Affected designation, while the original part lists REACH Affected status as well.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 535598-1 be used as a direct replacement for the 3M 929842-01-07-10?

A: Yes. Both connectors share identical position count (14), pitch (0.100"), row configuration (2 rows), mounting method (through-hole), and electrical ratings (2A, gold-plated contacts). The substitute is mechanically and electrically interchangeable.

Q: What are the key differences between these connectors?

A: The primary differences are contact base material (copper alloy versus phosphor bronze), insulation material composition (PET versus polyester), and operating temperature range (the substitute supports -65°C to 125°C versus -55°C to 105°C). The substitute connector is in active production, whereas the original is obsolete.

Q: Are there any compliance or certification differences?

A: Both connectors are RoHS non-compliant and carry EAR99 export classification. The substitute part lists REACH status as Vendor Undefined, while the original lists REACH Affected. Consult compliance requirements for your specific application.

Q: Does the substitute connector fit the same PCB footprint?

A: Yes. Identical pitch (0.100"), row spacing (0.100"), and through-hole mounting specifications ensure the substitute connector uses the same PCB footprint as the original 3M connector.

Q: What is the packaging difference?

A: The TE Connectivity substitute is supplied in tube packaging, whereas the original 3M part packaging is not specified in available documentation.