3M 929400-01-14 Equivalent & Substitute Parts

Part Overview

The 3M 929400-01-14 is a rectangular connector header designed for through-hole mounting applications. This 14-position, single-row connector operates at 2.5A current rating with a 0.100" (2.54mm) pitch and is constructed from tin-lead plated copper alloy contacts with PBT insulation. The connector is currently in Active product status with 997 units in stock. Identifying equivalent and substitute parts is necessary when the primary part reaches end-of-life, inventory constraints occur, or design revisions require alternative sourcing options.

Substiute Parts

929400-01-14

3MIn Stock: 1098929400-01-14 Datasheet

Current PartRFQ

929400-01-14

3MIn Stock: 999929400-01-14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 929400-01-14 is determined by strict alignment with the following critical parameters:

• Connector Type: Header, Breakaway configuration
• Number of Positions: 14 positions
• Pitch - Mating: 0.100" (2.54mm)
• Contact Type: Male Pin
• Mounting Type: Through Hole
• Termination: Solder
• Current Rating: 2.5A minimum
• Operating Temperature Range: -40°C ~ 105°C
• Insulation Material: PBT, Polyester, Glass Filled
• Material Flammability Rating: UL94 V-0

The substitute part identified maintains identical electrical and mechanical specifications across all critical parameters, ensuring direct functional equivalence in board-to-board applications.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 3M 929400-01-14 is functionally equivalent to the main part across all electrical and mechanical specifications. The primary distinction is product status: the main part is Active with 997 units in stock, while the substitute is designated Last Time Buy with 941 units available. Selection between these parts should be based on inventory availability and procurement timeline requirements. Both parts carry identical compliance certifications (UL94 V-0, EAR99) and are suitable for equivalent applications. The substitute part's Last Time Buy status indicates reduced future availability, making it appropriate for immediate sourcing needs only.

Frequently Asked Questions (FAQ)

Q: Can the 3M 929400-01-14 substitute part be used as a direct replacement in existing designs?

A: Yes. The substitute part maintains identical electrical and mechanical parameters, including pitch, contact type, current rating, operating temperature range, and insulation specifications. Direct substitution is supported without design modification.

Q: What is the significance of the Last Time Buy status on the substitute part?

A: Last Time Buy designation indicates that the manufacturer will discontinue production after current inventory is depleted. This part should be selected only when immediate availability is required. For long-term production requirements, the Active status main part is recommended.

Q: Are there any compliance or certification differences between the main part and substitute?

A: No. Both parts carry identical compliance certifications: UL94 V-0 flammability rating, EAR99 export classification, and HTSUS code 8536.69.4040. Regulatory requirements are equivalent.

Q: What are the critical parameters that define substitution eligibility for this connector?

A: Substitution is determined by matching: 14-position count, 0.100" (2.54mm) pitch, male pin contact type, through-hole mounting, solder termination, 2.5A current rating, -40°C to 105°C operating temperature, PBT insulation material, and UL94 V-0 flammability rating.

Q: Does the packaging format affect substitution compatibility?

A: Both parts are supplied in Bulk packaging. Packaging format does not affect electrical or mechanical compatibility. Procurement and handling procedures remain identical.