926141-01-16-EU Equivalent & Substitute Parts

Part Overview

The 3M 926141-01-16-EU is a rectangular connector header designed for through-hole mounting applications. This 16-position, single-row connector operates at 0.100" (2.54mm) pitch and is rated for 2.5A current with an operating temperature range of -40°C to 105°C. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value
Connector Type	Header, Breakaway
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	16
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Material Flammability Rating	UL94 V-0
Operating Temperature	-40°C ~ 105°C
Current Rating	2.5A
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the 926141-01-16-EU is determined by the following critical parameters:

Pitch and Position Configuration: The substitute must maintain 0.100" (2.54mm) mating pitch with 16 positions in a single-row configuration to ensure mechanical and electrical compatibility with existing PCB layouts and mating connectors.
Contact Type and Termination: Male pin contacts with solder termination are required to match the original connector's interface and assembly process.
Mounting and Fastening: Through-hole mounting with push-pull fastening type ensures compatibility with the original application's mechanical requirements.
Electrical and Environmental Ratings: Contact finish (gold mating surface), flammability rating (UL94 V-0), and operating temperature range (-40°C to 105°C) establish the baseline performance envelope.
Current Capacity: The 2.5A current rating defines the electrical load capability for the substitute.

The Molex 0022102162 meets these substitution criteria across all critical parameters.

Parameter Comparison

Parameter	3M 926141-01-16-EU	Molex 0022102162
Manufacturer	3M	Molex
Connector Type	Header, Breakaway	Header
Contact Type	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	16	16
Number of Rows	1	1
Mounting Type	Through Hole	Through Hole
Termination	Solder	Solder
Fastening Type	Push-Pull	Push-Pull
Contact Finish - Mating	Gold	Gold
Contact Finish Thickness - Mating	10.0µin (0.25µm)	20.0µin (0.51µm)
Material Flammability Rating	UL94 V-0	UL94 V-0
Operating Temperature	-40°C ~ 105°C	Not specified
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active
ECCN	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040

Engineering Selection Recommendations

The Molex 0022102162 is the designated manufacturer-recommended substitute for the 926141-01-16-EU. Selection of this alternative is supported by the following factors:

Product Status: The original 3M part is obsolete, while the Molex substitute maintains active production status, ensuring long-term availability and supply chain continuity.
Compliance and Certification: Both connectors carry UL94 V-0 flammability ratings and share identical ECCN and HTSUS classifications, confirming regulatory equivalence.
Electrical and Mechanical Compatibility: The substitute maintains identical pitch, position count, contact type, mounting method, and fastening mechanism, ensuring direct compatibility with existing PCB designs and mating connectors.
Contact Finish Enhancement: The Molex part provides increased gold plating thickness (20.0µin versus 10.0µin), which may offer improved contact durability and corrosion resistance in extended-life applications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0022102162 be used as a direct replacement for the 3M 926141-01-16-EU?

A: Yes. Both connectors share identical mating pitch (0.100"), position count (16), contact type (male pin), mounting method (through-hole), and fastening type (push-pull). The mechanical and electrical interfaces are compatible with existing PCB layouts and mating connectors.

Q: What are the key differences between these two connectors?

A: The primary differences are manufacturer identity, product status (obsolete versus active), insulation material composition (PCT versus polyamide/nylon), insulation color (black versus white), and contact finish thickness on the mating surface (10.0µin versus 20.0µin). The Molex part also supports board-to-board or cable applications, whereas the 3M part is specified for board-to-board only.

Q: Are there any compatibility concerns with the different insulation materials?

A: Both materials (PCT and polyamide/nylon) meet UL94 V-0 flammability requirements and carry identical moisture sensitivity levels (MSL 1). Material selection does not affect mechanical or electrical compatibility in standard applications.

Q: Does the increased gold plating thickness on the Molex connector provide any performance advantage?

A: The thicker gold plating (20.0µin on Molex versus 10.0µin on 3M) may provide extended contact life and improved resistance to corrosion in high-cycle mating applications or harsh environmental conditions.

Q: What is the packaging format for the substitute part?

A: The Molex 0022102162 is supplied in bulk packaging, whereas the original 3M part packaging format is not specified in the available data.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message