3M 926141-01-13-I Equivalent & Substitute Parts

Part Overview

The 3M 926141-01-13-I is a rectangular connector header designed for through-hole mounting applications. This 13-position, single-row connector operates at 0.100" (2.54mm) pitch and is rated for 2.5A current with an operating temperature range of -40°C to 105°C. The part is classified as obsolete, making identification of active equivalent components essential for ongoing design support and procurement.

Substiute Parts

926141-01-13-I

3MIn Stock: 1092926141-01-13-I Datasheet

Current PartRFQ

0423751866

MolexIn Stock: 8200423751866 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Molex 0423751866 qualifies as a substitute based on the following critical parameters:

• Identical pitch specification: 0.100" (2.54mm)
• Matching position count: 13 positions
• Identical connector type: Header, Breakaway
• Matching contact type: Male Pin
• Identical mounting method: Through Hole
• Identical termination: Solder
• Matching fastening type: Push-Pull
• Identical row configuration: Single row
• Matching shrouding: Unshrouded
• Identical material flammability rating: UL94 V-0
• Matching insulation color: Black
• Identical moisture sensitivity level: 1 (Unlimited)

The substitute part is currently in active production status, providing long-term availability compared to the obsolete 3M original.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0423751866 is the designated manufacturer-recommended substitute for the obsolete 3M 926141-01-13-I. Both components share identical electrical and mechanical specifications for the critical mating interface parameters. The Molex part maintains active production status, ensuring continued availability for new designs and replacement applications. Both components carry UL94 V-0 flammability certification and are classified as ROHS3 compliant or unaffected by REACH regulations, meeting current environmental and safety standards.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0423751866 directly replace the 3M 926141-01-13-I in existing designs?

A: Yes. Both connectors share identical pitch (0.100"), position count (13), mounting type (through-hole), and termination method (solder). The mating interface is mechanically and electrically compatible.

Q: What are the differences between these two connectors?

A: The primary differences are contact finish material (3M uses gold; Molex uses tin), contact finish thickness (3M: 10.0µin; Molex: 100.0µin), insulation material composition (3M: PBT polyester; Molex: polyamide nylon), and overall contact length (3M: 0.628"; Molex: 0.700"). These differences do not affect substitution compatibility for standard applications.

Q: Why is the 3M part listed as obsolete?

A: The 3M 926141-01-13-I has been discontinued. The Molex 0423751866 provides functional equivalence for new procurement and design continuity.

Q: Are there any compliance or certification differences?

A: Both parts carry UL94 V-0 flammability ratings and identical moisture sensitivity levels. The Molex part is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

Q: What packaging options are available?

A: The 3M original was supplied in standard packaging. The Molex substitute is available in bulk packaging, suitable for production assembly environments.